ENGLISH
25
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
STEERING
WHEEL
REMOTE
KD-R961BT
KD-R864BT
/
KD-R862BT
/
KD-R861BT
Wiring connection
Light blue/yellow
Signal cord
(not supplied)
Remote wire
(not supplied)
To the steering wheel
remote control adapter
Fuse (10 A)
To Blue/white wire of
the wiring harness
(D)
Antenna terminal
JVC Amplifier
*
1
IMPORTANT:
A custom wiring harness
(separately purchased) which is suitable for
your car is recommended for connection.
If your car does NOT have an ISO
terminal
( or )
ISO connector
*
2
Custom wiring harness (separately
purchased)
For some VW/Audi or Opel (Vauxhall)
automobiles
You may need to modify the wiring of the
supplied power cord
(D)
as illustrated.
If the unit does not turn on with modified
wiring 1, use modified wiring 2 instead.
Y: Yellow
R: Red
Original wiring
Modified wiring 1
Modified wiring 2
Pin
Color and function
A4 Yellow
: Battery
A5 Blue/White
: Power control
A6 Orange/white
: Car light control switch
A7 Red
: Ignition (ACC)
A8 Black
: Earth (ground) connection
B1 Purple
ª
: Rear speaker (right)
B2 Purple/black
·
B3 Gray
ª
: Front speaker (right)
B4 Gray/black
·
B5 White
ª
: Front speaker (left)
B6 White/black
·
B7 Green
ª
: Rear speaker (left)
*
3
B8 Green/black
·
*
3
You can also connect a subwoofer speaker directly
without an external subwoofer amplifier. For
setting, 16.
Front output
Rear output
Subwoofer output
Rear/subwoofer output
Part list for
installation
(A)
Faceplate
(C)
Mounting sleeve
(B)
Trim plate
(D)
Wiring harness
(E)
Extraction key
*
1
Firmly connect the ground
wire of the amplifier to
the car’s chassis to avoid
damaging the unit.
Microphone input jack
( 9)
JS_JVC_KD_R961BT_E_EN_20_1.indd 25
JS_JVC_KD_R961BT_E_EN_20_1.indd 25
20/10/2014 11:09:55 AM
20/10/2014 11:09:55 AM