ENGLISH
25
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
STEERING
WHEEL
REMOTE
Car fuse block
Ignition switch
Recommended connection
Light blue/yellow
Blue/white: To amplifier
Blue: To power antenna
Make this connection if
your vehicle factory wiring
harness does not have “12 V
ignition switch” wire.
Separate red
wire
Signal cord
(not supplied)
Remote wire
(not supplied)
To the steering
wheel remote
control adapter
Fuse (10 A)
Antenna terminal
JVC Amplifier
*
1
Factory wiring
harness (vehicle)
Vehicle dashboard
Black: Ground
Yellow: Battery 12 V
White: Front speaker/For 3-way crossover: Mid range speaker (left)
White/black
Gray: Front speaker/For 3-way crossover: Mid range speaker (right)
Gray/black
Purple: Rear speaker/For 3-way crossover: Tweeter (right)
Purple/black
Join the same color wires together.
Red: Ignition 12 V
Orange/white: Illumination
Blue/white: Remote (200 mA max.)
Part list for
installation
(A)
Faceplate
(C)
Mounting sleeve
(B)
Trim plate
(D)
Wiring harness
(E)
Extraction key
Wiring connection
Green: Rear speaker
*
2
/For 3-way crossover: Tweeter (left)
Green/black
*
2
*
2
You can also connect a
subwoofer speaker directly
using this lead without
an external subwoofer
amplifier. For setting,
16
.
*
1
Firmly connect the ground wire
of the amplifier to the car’s
chassis to avoid damaging the
unit.
IMPORTANT
We recommend installing the unit with a
commercially available custom wiring harness
specific for your car and leave this job to professionals
for your safety. Consult your car audio dealer.
Custom
wiring
harness
(separately
purchased)
Front/ Rear/Subwoofer output
For 3-way crossover: Mid Range/ Woofer output
(Not used)
Brown
Microphone input
jack
( 8)
JS_JVC_KD_R771BTM_M2_2.indd 25
JS_JVC_KD_R771BTM_M2_2.indd 25
23/9/2015 3:03:18 PM
23/9/2015 3:03:18 PM
