9
BLUETOOTH®
To
Do this
Set the echo
cancellation
delay time
Press
E
/
F
during a call.
Delay
time:
[01]
to
[10]
(Default:
[04]
)
Text message
notification
When the phone receives a text message, the unit rings
and “RCV MESSAGE”
]
[Device name]
appears.
•
[MSG NOTICE]
must be set to
[ON]
.
• You cannot read, edit, or send a message through the unit.
• To clear the message, press any button.
Switch between
two connected
phones
• To enter 1st phone’s hands-free menu: Press
.
• To enter 2nd phone’s hands-free menu: Press
twice.
• To return to 1st phone’s hands-free menu: Press
G
.
Hands-free menu operations
1
Press
.
2
Turn the volume knob to make a selection (see the following table), then
press the knob.
Repeat
step
2
until the desired item is selected.
• To return to the previous hierarchy, press
G
.
• To cancel, press
MENU
.
RECENT CALL
1
Turn the volume knob to select a name or a phone number.
• “>” indicates call received, “<“ indicates call made, “M” indicates call
missed.
• “NO HISTORY” appears if there is no recorded call history.
2
Press the volume knob to call.
PHONEBOOK
1
Turn the volume knob to select a name, then press the knob.
2
Turn the volume knob to select a phone number, then press the knob to call.
• If the phonebook contains many numbers, you can fast search for the
desired number by turning the control dial quickly, or use Character Search.
(
➜
10)
• “NO DATA” appears if no entries are found in the Bluetooth device’s
phonebook.
• “SEND P.BOOK MANUALLY” appears if
[P.BOOK SEL]
is set to
[PB IN UNIT]
or the phone does not support PBAP.
DIAL NUMBER
1
Turn the volume knob to select a number (0 to 9) or character ( , #, +).
2
Press
E
/
F
to move the entry position.
Repeat steps
1
and
2
until you finish entering the phone number.
3
Press the volume knob to call.
VOICE
Activate Voice Recognition of this phone.
(
➜
10)
Default:
XX
SETTINGS
P.BOOK SEL
*
PB IN PHONE
: The unit browses the phonebook of the connected phone. ;
PB IN UNIT
: The unit browses the phonebook registered in the unit. (You can
copy the phonebook memory using
[P.BOOK WAIT]
).
(
➜
11)
AUTO
ANSWER
03
SEC
/
05
SEC
/
10
SEC
: The unit answers incoming calls automatically in 3 /
5 / 10 seconds. ;
OFF
: Cancels.
RING TONE
IN UNIT
: The unit rings to notify you when a call/text message comes in. (Default
ring tone is different according to the paired device.)
•
CALL
: Select your preferred ring tone (
TONE 1
—
5
) for incoming calls.
•
MESSAGE
: Select your preferred ring tone (
TONE 1
—
5
) for incoming text
messages. ;
IN PHONE
: The unit uses the connected phones’ ring tone to notify you when a
call/text message comes in. (The connected phone will ring if it does not support
this feature.)
ECHO
CANCEL
01
—
10
(
04
): Adjust the echo cancellation delay time until the least echo is
being heard during a phone conversation.
MIC LEVEL
01
—
03
(
02
): The sensitivity of the microphone increases as the number
increased.
MSG NOTICE
ON
: The unit rings and “RCV MESSAGE”
]
[Device Name] appears to notify you
of an incoming text message. ;
OFF
: Cancels.
* Selectable only when the connected phone supports PBAP.
ENGLISH
EN_KD-R746BT[U]001A_f.indd 9
EN_KD-R746BT[U]001A_f.indd 9
2/27/13 9:55:28 AM
2/27/13 9:55:28 AM