JVC KD-R746BT, Инструкция по эксплуатации

Страница: 10 / 18

10
BLUETOOTH®
Character search
You can search through the contacts quickly according to the first character (A to Z,
0 to 9, and OTHERS).
• “OTHERS” appear if the first character is other than A to Z, 0 to 9.
1
Press .
2
Turn the volume knob to select
[PHONEBOOK]
, then press the knob.
3
Press 1
∞
/ 2
5
to select the desired character.
4
Turn the volume knob to select the desired contact, then press the knob to
call.
Use Voice Recognition
1
Press and hold to enter Voice Recognition mode.
If two phones are connected, turn the volume knob to select the desired phone,
then press the knob.
2
Speak the name of the contact you want to call or the voice command to
control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the instruction
manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of iPhone.
Store a contact in memory
You can store up to 6 contacts.
1
Press .
2
Turn the volume knob to select [RECENT CALL] , [PHONEBOOK] , or [DIAL NUMBER] ,
then press the knob.
3
Turn the volume knob to select a contact or enter a phone number.
4
Press and hold one of the number buttons ( 1 to 6 ).
“MEMORY PX” flashes when the contact is stored.
To erase a contact from the preset memory, select
[DIAL NUMBER]
in step 2 and store
a blank number.
Make a call from memory
1
Press .
2
Press one of the number buttons ( 1 to 6 ).
3
Press the volume knob to call.
“NO PRESET” appears if there are no contacts stored.
Delete a contact
Only when
[P.BOOK SEL]
is set to
[PB IN UNIT]
.
(
➜
9)
1
Press .
2
Turn the volume knob to select [RECENT CALL] or [PHONEBOOK] , then press the
knob.
3
Turn the volume knob to select a contact or enter a phone number.
4
Press and hold G .
5
Turn the volume knob to select [DELETE] or [DELETE ALL] , then press the knob.
DELETE : Selected name or phone number in step
3
is deleted.
DELETE ALL : All names or phone numbers from the selected menu in step
2
is
deleted.
Bluetooth compatibility check mode
You can check the connectivity of the supported profile between the Bluetooth
device and the unit.
1
While pressing and holding , press and hold the volume knob for about
3 seconds.
“BLUETOOTH”
Ô
“CHECK MODE” appears.
2
Search and select “JVC UNIT” on the Bluetooth device within 3 minutes.
“PAIRING OK” appears and Bluetooth compatibility check starts.
The connectivity result flashes on the display for 30 seconds.
• “H.FREE OK”
Ô
“[Device Name]” : Compatible with Hands-Free Profile (HFP)
• “A. STREAM OK”
Ô
“[Device Name]” : Compatible with Advanced Audio
Distribution Profile (A2DP)
• “CONNECT FAIL”
Ô
“TRY CONNECT” : Not compatible
• To exit, turn off the unit by pressing and holding L SOURCE .
EN_KD-R746BT[U]001A_f.indd 10 EN_KD-R746BT[U]001A_f.indd 10 2/27/13 9:55:28 AM 2/27/13 9:55:28 AM