Reassembling Main Assemblies
Reassemble the Pickup unit(see "Reassembling
the Tra.Mecha SA")
Attach the Pickup unit to the Pickup base
(see "Removing the Pickup Unit")
Attach the Media holder SA.(see "Removing the
Media Holder SA.")
Attach the L.roller SA.(see "Removing the L.Roller
SA")
Attach the Clamper SA and fix the CL.base
BKT.Ass'y.(see "Removing the Clamper SA")
Attach the Floating unit to the Suspension flame
unit.(see "Removing the Floating Unit")
NOTE 1:Attach each slider of the Suspension
flame unit before attaching the FA.motor
SA.(Each slider can not be detached or
attached after the F.A.motor SA is
attached.)
NOTE 2:The dampers and springs used in the
Floating unit are each different,so attach
them to the correct positions.
NOTE 3:Attach the Floating unit to the lifted
Suspension flame. Then,attach the
damper. Turn the F.A.motor SA clockwise
as shown in the Fig.14 and 34. Then both
ends of the shaft is locked.
(see Fig.34 and 14)
NOTE4 :After attaching the Floating unit, confirm
that parts u and v in the back of the body
are as shown in the Fig.35.
Attach the Top cover Ass'y
(see "Removing the Top Cover Ass'y")
NOTE 1:Before attaching the Top cover, lock the
Floating unit and return the Top cover
Ass'y to the initial position.
NOTE 2:To attach the Top cover, insert tab y' of
the Top cover Ass'y into slot Y of the
Suspension flame.
Attach the MD servo board.
(see "Removing the MD servo board")
Make sure that each harness is attached to the
connector correctly.
1.
2.
3.
4.
5.
6.
7.
8.
Refer to each item for removal.
Fig.34
Fig.35
Fig.36
FLOATING UNIT
SHAFT
GEAR
F.A.MOTOR SA
u
v
TOP COVER Ass'y
y'
Y
Содержание KD-MX2900R
