KD-LH70R
1-6 (No.49803)
2.1.5 Removing the rear bracket
(See Fig.8)
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly, heat sink and bottom
cover.
(1) Remove the three screws
E
, two screws
F
and two screws
G
on the back side of the main body.
(2) Remove the rear bracket.
REFERENCE:
During reassembly, before fixing the rear bracket onto the
main body, insert the Subwoofer and steering cables into the
slots.
Fig.8
2.1.6 Removing the main board
(See Fig.9)
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly, heat sink, bottom
cover and rear bracket
(1) Remove the two screws
H
attaching the main board.
(2) Disconnect the connector CN101 and remove the main
board.
Fig.9
2.1.7 Removing the mecha control board
(See Fig. 10)
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly, heat sink, bottom
cover, rear bracket and main board.
attaching the mecha control
(2) Disconnect the card wire from the mecha connector.
(3) Move the mecha control board in the direction of the arrow
Fig.10
G
E
E
F
Rear bracket
G
Insert Subwoofer and steering
cables into the slots.
Main board
H
H
CN101
J
J
Mecha control board
Mecha
connector
Card wire
Top chassis
Joint
g
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
