27
ENGLISH
SOUND ADJUSTMENTS
Adjusting the sound
You can adjust the sound characteristics to your
preference.
• “Vol Adj” setting is required for each source
except FM. Before starting “Vol Adj,” select an
appropriate source for which you want to make
an adjustment.
1
Select the item you want to adjust.
The next-step-operation
buttons start flashing.
Each time you press SEL
(select), the adjustable items
change as follows:
• For iEQ (sound mode) settings, see pages
28 and 29.
• For METER (level meter) settings, see
page 30.
Indication
To do:
Range
Fad*
Adjust the front
R06 (Rear only)
and rear speaker
|
balance.
F06 (Front only)
Bal
Adjust the left
L06 (Left only)
and right speaker |
balance.
R06 (Right only)
Vol Adj
Adjust and store
–12 (min.)
the input level
|
of each source.
+12 (max.)
*
If you are using a two-speaker system, set the fader
level to “00.”
2
Make adjustments.
• To adjust fader and balance—Fad, Bal:
You can make these two adjustments at
the same time, by referring to the
indication on the display.
• Press
5
(up) or
∞
(down)
to adjust the fader.
• Press
¢
or
4
to adjust the balance.
• To adjust the input level of each source
—Vol Adj:
This setting is required for each source
except FM. Before making an adjustment,
select an appropriate source for which you
want to make an adjustment.
Once you have adjusted it, it is
memorized, and you will not need to
adjust the volume level each time you
change the source.
Adjust the input level to match the FM
sound level.
• You cannot make an adjustment if the
source is FM. “FIX” will appear.
To decrease the level
To increase the level
Canceled
Vol Adj
Fad/Bal
iEQ
METER
EN27-30KD-LH1101[E_EX]f.p65
2/26/03, 11:44 AM
27
Содержание KD-LH1101
Страница 227: ...Instructions CD RECEIVER KD LH1101 ...