ENGLISH
9
3
Adjust the PSM item selected.
4
Repeat steps
2
and
3
to adjust other
PSM items if necessary.
5
Finish the procedure.
You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
2
Select a PSM item.
Indications
Selectable settings, [reference page]
DEMO
Display
demonstration
DEMO ON
:
[Initial];
Display demonstration will be activated automatically
if no operation is done for about 20 seconds, [5].
DEMO OFF
: Cancels.
CLOCK H
Hour adjustment
1 – 12, [5]
[Initial: 1 (1:00)]
CLOCK M
Minute adjustment
00 – 59, [5]
[Initial: 00 (1:00)]
L/O MODE
Line output mode
When connecting an amplifier or a subwoofer, set this correctly.
REAR
:
[Initial];
Select if the REAR LINE OUT terminals are used for
connecting the speakers through an external amplifier.
WOOFER
: Select if the REAR LINE OUT terminals are used for
connecting a subwoofer.
AMP GAIN
Amplifier gain
control
You can change the maximum volume level of this unit.
LOW PWR
: VOL 00 – VOL 30 (Select this if the maximum power of the
speaker is less than 50 W to avoid damaging the speaker.)
HIGH PWR
:
[Initial];
VOL 00 – VOL 50
General settings — PSM
EN06-09_KD-G125_126[UN]f.indd 9
EN06-09_KD-G125_126[UN]f.indd 9
10/4/05 11:55:29 AM
10/4/05 11:55:29 AM
