3
To external components (see diagram )
Light green
VIDEO OUT
(see diagram
)
DIGITAL OUT
(see diagram
)
A
To parking brake, metallic body or chassis of the car
Before connecting:
Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit.
The leads of the power cord and those of the connector from the car body may be different in color.
1
Connect the colored leads of the power cord in the order specified in the illustration below.
2
Connect the antenna cord.
3
Finally connect the wiring harness to the unit.
15 A fuse
Black
Blue with white stripe
Red
Yellow
*
2
To metallic body or chassis of the car
Ignition switch
Fuse block
To an accessory terminal in the fuse block
To the remote lead of other equipment (200 mA max.)
To a live terminal in the fuse block connecting to the car battery
(bypassing the ignition switch) (constant 12 V)
Rear ground terminal
Left speaker (front)
Right speaker (front)
Left speaker (rear)
Right speaker (rear)
Purple
Purple with black stripe
Green
Green with black stripe
Gray
Gray with black stripe
White
White with black stripe
Typical connections
Antenna connector
To the automatic antenna if any (250 mA max.)
Blue
LINE IN
(see diagram
)
SW
(Subwoofer)
(see diagram
)
LINE OUT
(see diagram
)
2nd AUDIO OUT
(see diagram
)
Orange with white stripe
To car light control switch
ELECTRICAL CONNECTIONS
B
Rear speakers
JVC Amplifier
Y-connector (not supplied for this unit)
Remote lead (blue with white stripe)
To the remote lead of other equipment
or automatic antenna if any
Front speakers
*
1
Not supplied for this unit.
*
2
Before checking the operation of this unit prior to installation, this lead must be connected, otherwise power cannot be turned on.
*
3
Remote lead
*
4
Signal cord (not supplied for this unit).
*
5
Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place uncoated with paint (if coated with paint, remove the paint before attaching the wire). Failure to do so may cause damage to the unit.
Connecting the external amplifiers and subwoofer
You can connect amplifiers to upgrade your car stereo system.
• Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit.
• Disconnect the speakers from this unit, connect them to the amplifier. Leave the speaker leads of this unit unused.
Front speakers
JVC Amplifier
Subwoofer
JVC Amplifier
Instal3-4_DV7406_009A_f.indd 3
Instal3-4_DV7406_009A_f.indd 3
2/12/08 12:52:22 PM
2/12/08 12:52:22 PM
