JVC KD-AR800, Инструкция по эксплуатации

Страница: 39 / 66

39
ENGLISH
EXTERNAL COMPONENT OPERATIONS
This section is only for KD-AR800/KD-G800.
Playing an external component
For KD-AR800:
You can connect an external components to the
LINE IN plugs on the rear.
• You can also connect the SIRIUS tuner to the
CD changer jack on the rear and select it as
the external component.
For KD-G800:
You can connect the external component to the
CD changer jack on the rear using the adapter
specially designed for the external component.
• Before operating the external component,
select the “EXTERNAL IN” setting correctly
(see page 30).
• To use the JVC SIRIUS Radio, refer to the
SIRIUS Radio Setup Manual (separate
volume).
1
Select the external component
(LINE IN/SIRIUS).
For KD-AR800:
Press CD/CD-CH LINE repeatedly.
To select LINE IN, press and hold
CD/CD-CH LINE.
For KD-G800:
Press CD/CD-CH repeatedly.
Note on One-Touch Operation:
When you press CD/CD-CH LINE (for
KD-AR800) or CD/CD-CH (for KD-G800), the
power automatically comes on. You do not have
to press
to turn on the power.
2
Turn on the connected component
and start playing the source.
3
Adjust the volume.
4
Adjust the sound as you want.
(See pages 23 – 25.)
CD CD-CH
(or SIRIUS)
CD CD-CH
(or LINE IN/
SIRIUS)