12
TROUBLESHOOTING
Symptom
Remedy
Sound cannot be heard.
• Adjust the volume to the optimum level.
• Check the cords and connections.
• Be sure the rear ground terminal connected to the car’s chassis
are using shorter and thicker cords.
“MISWIRING CHK WIRING
THEN RESET UNIT” /
“WARNING CHK WIRING THEN
RESET UNIT” appears and no
operations can be done.
Check to be sure the terminals of the speaker wires are insulated
properly, then reset the unit. If this does not solve the problem,
consult your nearest service center.
Source cannot be selected.
Check
the
[SRC SELECT]
setting.
(
➜
4)
Radio reception is poor. /
Static noise while listening to
the radio.
• Connect the antenna firmly.
• Pull the antenna out all the way.
Sound quality changes when
receiving HD Radio stations/
channels.
Fix the reception mode to either
[ANALOG]
or
[DIGITAL]
.
(
➜
6)
No sound can be heard.
•
[ANALOG]
is selected when receiving all digital broadcast of HD
Radio station. Select
[AUTO]
or
[DIGITAL]
.
(
➜
6)
•
[DIGITAL]
is selected when receiving a weak digital signals
or receiving conventional radio broadcast. Select
[AUTO]
or
[ANALOG]
.
(
➜
6)
iTunes Tagging
“MEMORY FULL”
You are trying to store the 51st PSD. Transfer the tagged PSDs to
the iPod/iPhone, or clear all tagged PSDs.
“TAG ALREADY SAVED”
You are trying to tag the same song for the 2nd time .
“NO TAG DATA”
The broadcast currently received does not support the iTunes
Tagging or the broadcast does not provide PSD.
“CAN’T TRANS IPOD FULL”
The memory of the iPod/iPhone is full.
“UNSUPPORTED DEVICE
FOR TAGGING”
The connected iPod/iPhone is not compatible with iTunes
Tagging.
“TRANS ERROR”
The iPod/iPhone is disconnected during data transfer.
“TRANS OFF”
Data transfer is canceled.
Correct characters are not
displayed.
This unit can only display uppercase letters, numbers, and a
limited number of symbols.
“PLEASE” and “EJECT” appear
alternately.
Press
0
, then insert the disc correctly.
Symptom
Remedy
“IN DISC” appears.
Make sure nothing is blocking the loading slot when you eject the
disc.
Disc cannot be ejected.
Press and hold
0
to forcibly eject the disc. Be careful not to drop the
disc when it is ejected.
Playback order is not as
intended.
The playback order is determined by the file name (USB) or the order
in which files were recorded (disc).
Elapsed playing time is
not correct.
This depends on the recording process earlier.
“NOT SUPPORT” appears
and track skips.
Check whether the track is a playable format.
(
➜
11)
“CANNOT PLAY” flashes
and/or connected device
cannot be detected.
• Check whether the connected device is compatible with this unit and
ensure the files are in supported formats.
(
➜
11)
• Reattach the device.
“READING” keeps
flashing.
• Do not use too many hierarchical levels and folders.
• Reload the disc or reattach the USB device.
The iPod/iPhone does
not turn on or does not
work.
• Check the connection between this unit and iPod/iPhone.
• Detach and reset the iPod/iPhone using hard reset.
• Check whether the
[IPOD SWITCH]
setting is appropriate.
(
➜
4)
Pandora
“ADD ERROR” /
“SEARCH ERR”
New station creation is unsuccessful.
“CHK DEVICE”
Check the Pandora application on your device.
“NO SKIPS”
The skip limit has been reached.
“NO STATIONS”
No registered station is found.
“STATION LIM”
The number of registered stations has reached it’s limit. Retry after
deleting an unnecessary station in your device.
“UPGRADE APP”
Make sure you have installed the latest version of the Pandora
application on your device.
If you have any troubles, try the following:
1 Check
TROUBLESHOOTING
2 Reset the unit (
➜
3)
3 Contact (USA only)
Call: 1-800-252-5722 ( or ) visit: http://www.jvc.com
EN_KD-AHD57[J]5.indd 12
EN_KD-AHD57[J]5.indd 12
9/28/12 11:25:21 AM
9/28/12 11:25:21 AM
