JVC KD-A605J, Руководство по обслуживанию

Страница: 20 / 85

1-20 (No.MA442<Rev.002>)
4.6 Service mode
Operating key: [MENU] [DOWN] (3 sec)
Navigation key : Press [SEL] in any main display item to select that option.
Volume Knob Turn: forward and backward selection
INIT ALL Initialize all data to factory shipment state.
SIRIUS RST SIRIUS Soft Reset
(It clears all the contents of built-in RAM and EEPROM, and performs software reset.)
* Active at the time of SIRIUS connection.
XM RST XM Soft Reset (It clears all contents of built-in RAM and EEPROM, and performs software reset.)
* Active at the time of XM connection.
HD RST HD Soft Reset (It clears all contents of built-in RAM and EEPROM, and performs software reset.)
* Active at the time of HD connection.
DAB RST DAB Soft Reset (It clears all contents of built-in RAM and EEPROM, and performs software reset.)
* Active at the time of DAB connection.
BT RST BT Soft Reset (It clears all contents of built-in RAM and EEPROM, and performs software reset.)
* Active at the time of BT connection.
CD ERROR Display the CD Error past record stored in EEPROM.
TOTAL-****: Total error count
E#xxyyyy : Latest 3 errors recorded. #: counter xx: error code yyyy: detailed error code
0#xxyyyy : The first 5 errors recorded. #: counter xx: error code yyyy: detailed error code
Note: Shifting among the above items is done by using "FF" or "REW" key.
CLR CDERROR Clear CD Error history from EEPROM.
CH ERROR Display the CH Error past record stored in EEPROM
* Active at the time of CD CHANGER/ iPod (J-BUS) connection
E#xxyyyy : Latest 3 errors recorded. #: counter xx: error code yyyy: detailed error code
0#xxyyyy : The first 5 errors recorded. #: counter xx: error code yyyy: detailed error code
Note: Shifting among the above items is done by using "FF" or "REW" key.
CLR CHERROR Clear CH Error history from EEPROM.
* Active at the time of CD CHANGER/ iPod (J-BUS) connection
TSUBUYAKI Only engineer use
RUNNING MODE 1 CD4 module running mode 1 (Only factory use)
MODE 2
Note : A disc is inserted, and it is displayed only at the time of CD function.
CD4 module running mode 2 (Only factory use)
CHECK MODE NORMAL PLAY Disc operation & playback. (playback from starting position)
OUT TRK OFF Tracking off at CD outermost lap.
INN TRK OFF Tracking off at CD innermost lap.
CD LASER ON CD Laser Illumination and electric current.
CURENT ##** Laser Electric Current Value
##: Initial value **: Current value
JITTER #### Jitter Value
Note: Pressing "FF" or "REW" key to switch between current value
aand jitter value display.
STOP Disc stop, LD(Laser) OFF
CURENT ##** Laser Electric Current Value
##: Initial value **: Current value
JITTER #### Jitter Value
Note: Pressing "FF" or "REW" key to switch between current value
and jitter value display.