●
Attach the cover after confirming the blind masks and rubber
packing parts
1.
2.
3.
Dome
Cover (KA-C76)
Tab
Groove
Pipe
Main body
cover
Clearance
Align the tab on the dome cover (KA-
C76) with the groove on the pipe and
fit the dome cover.
In some instances, the rubber
packing parts may be displaced
when removing the dome cover.
Check that the rubber packing
parts are attached correctly. If
they are not correctly attached,
re-attach them so they are
positioned as shown in the
illustration. If they are skewed or
displaced inwards, it will not be
possible to attach the dome
cover correctly.
Attach the main
body cover.
In order to secure the main body
cover, turn it in the direction
indicated.
Secure the dome cover so that the
clearance between the main body
cover and the main body is no
more than 0.5 mm. If it is secured
incompletely, the dust- and drip-
proof performances cannot be
guaranteed.
Dome Cover
Cross-section
Rubber
Packing
Pipe
Attaching Blind Masks
(if they are not already attached)
●
If blind masks are not already attached, attach the provided
ones.
1.
Align the blind mask's lower
edge with the edge of the inner
cover
Å
and affix it. Do the
same for the opposite side.
Note:
Make sure that the blind masks are
attached securely so they do not
come off.
Å
Blind Mask
Blind Mask
Inner Cover
KA-C76.Inst
02.11.29, 9:56 AM
5
