AV-28X37SUE AV-28X37HKE
AV-28X35HKE AV-28X37HIE
AV-28H35SUE AV-28H35BUE
AV-28X35HUE
1-20 (No.52106)
3.5.2
FOCUS ADJUSTMENT
3.5.3
VSM PRESET ADJUST SETTING
Item
Measuring
instrument
Test point
Adjustment part
Description
FOCUS
adjustment
Signal
generator
FOCUS VR
[In HVT]
(1) Receive a cross-hatch signal.
(2) Select the FULL mode.
(3) While watching the screen, adjust the FOCUS VR to
make the vertical and horizontal lines as fine and
sharp as possible.
(4) Make sure that when the screen is darkened, the
lines remain in good focus.
FOCUS
HVT
SCREEN
Item
Measuring
instrument
Test point
Adjustment part
Description
VSM PRESET
setting
Remote
control unit
[5.VSM PRESET]
(BRIGHT/SOFT/STD)
1. CONT.
2. BRIGHT
3. SHARP
4. COLOUR
5. HUE
(COOL/WARM/
NOMAL)
1. WDR R
2. WDR G
3. WDR B
(1) Select STD(standard) of PICTURE MODE with the
[MENU] key.
(2) Select 5.VSM PRESET.
(3) Adjust the FUNCTION UP/DOWN and -/+ key to
bring the set values of 1.CONT to 5. HUE to the
values shown in the table.
(4) Press the [MENU] key and memorize the set value.
(5) Respectively select BRIGHT or SOFT of PICTURE
MODE, and make similar adjustment as in 3 above.
(6) Press the [MENU] key and memorize the set value.
(7) Select COOL of COLOUR TEMP with the [MENU]
key.
(8) Select 5.VSM PRESET.
(9) Adjust the FUNCTION UP/DOWN and -/+ key to
bring the set values of 1.WDR R to 3. WDR B to the
values shown in the table.
(10) Press the [MENU] key and memorize the set value.
(11) Respectively select NORMAL or WARM of
PICTURE MODE, and make similar adjustment as in
9 above.
(12) Press the [MENU] key and memorize the set value.
* Refer to OPERATING INSTRUCTIONS for the
PICTURE MODE.
1.CONT.
2.BRIGHT
3.SHARP 4.COLOUR
5.HUE
+7
0
0
0
0
-3
0
-2
0
0
0
0
0
0
0
BRIGHT
SOFT
STANDARD
1.WDR R
2.WDR G
3.WDR B
-15
-9
0
+4
0
0
0
0
0
COOL
WARM
NOMAL
VSM PRESET setting item