8
ENGLISH
Cancelling the display
demonstration
When shipped from the factory, display
demonstration (MovieDemo) has been activated,
and starts automatically when no operations are
done for about 20 seconds.
• It is recommended to cancel the
demonstration before you use the unit for the
first time.
To cancel the display demonstration, follow
the procedure below:
1
Press and hold SEL (select) for more
than 2 seconds so
that “MovieDemo”
appears on the
display.
(PSM: see pages
30
and
31
.)
2
Select “Off.”
3
Press SEL (select)
to finish the setting.
To activate the display demonstration, repeat
the same procedure and select “Interval” or “All
Time” in step 2.
• For more details, see “To set the movie demo—
MovieDemo” on page
31
.
Changing the display pattern
You can change the display pattern.
The number of the selectable display patterns
varies according to the playback sources.
However, the unit basically provides three main
display patterns for each source, and once one
of these three patterns is selected, the same
pattern is used for all the sources.
Press DISP (D).
Each time you press the button,
the display patterns change as
follows:
In this manual, the illustrations of the display are
mainly of the large animation display (initial
setting). If you have changed the display patterns
or some PSM items, the actual displays you see
will be different.
Note:
While playing a source, you can also show the level
meter on the display. For details, see “Activating the
level meter” on page
28
.
EX.: When playing a CD
*
Small animation displays are used for showing
not only the source’s main information
(illustrated on this page as examples), but also
showing some other information. For details, see
each related section.
Large animation
display
Small animation
displays*
Clock time
display
EN07-08LH2000[U]f.pm5
3/28/02, 14:23
8