34
ENGLISH
Changing the display color
You can set the display color using the PSM
control. By selecting “Source” as the “Mode”
(color mode) setting, you can select your favorite
color for each source (or for all sources).
Note:
When selecting “User” as the “Mode” setting, you
can adjust and store your own colors as you like. See
page 35.
Setting the desired color for each
source—Source
Once you have set the color for each source (or
for all sources), the display illuminates in the
selected color when the source is selected.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See pages 30 and 31.)
2
Press
5
(up) or
∞
(down) repeatedly
until “Color” appears as the PSM
category on the left side of the
display.
3
Select “Mode.”
4
Select “Source” as the “Mode” (color
mode) setting.
As you turn the control dial, the “Mode”
settings alternate between “Source” and
“User.”
5
Enter the source selecting mode.
Currently selected setting for “Mode”
Currently selected setting for “Source”
Source
User
EN29-38LH2000[U]f.pm5
3/28/02, 14:25
34
