JVC I'Art Pro 1204TNH-II-IM Скачать руководство пользователя страница 63

Страница: 63 / 88

Button Functions

Note : SMART SOUND (AV-56P785 ONLY)

By pressing the S

OUND

button, you can change the A.H.S. (Advanced Hyper Surround) mode,

BBE, and SMART SOUND on or off.

A.H.S. -

Adds a more spacious surround sound. Music gives basic effect and movie for more
effect.

BBE -

BBE High Definition Sound restores clarity and presence for better speech intelligibility
and musical realism.

SMART SOUND -

Decreases high sound levels, giving a regulated sound level.

Press the S

OUND

button

†

To select A.H.S., BBE or SMART SOUND

√

To choose the setting

Press the M

ENU

when finished

Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under
USP4638258, 5510752 and 5736897. BBE and BBE symbol are registered trademarks of
BBE Sound, Inc.

Sound

SOUND EFFECT

SELECT

OPERATE

EXIT

A.H.S.

BBE

SMART SOUND

MOVIE MUSIC OFF

ON OFF

The R

ETURN

+/TV button has three functions:

Return

- Returns to the channel viewed just before the channel currently onscreen.

- Lets you program a specific channel to return to while scanning through the

channels using the CH+ and CH– buttons.

- Returns to the TV mode.

Press the R

ETURN

+/TV and hold for three seconds

The channel currently active has been programmed as your channel. Now scan

through the channels using the C

HANNEL

+/– buttons.

Press the R

ETURN

+/TV

You will return to your programmed channel.

• To cancel your channel, press and hold the R

ETURN

+ button for three seconds. The

message “RETURN CHANNEL CANCELLED!” will appear.

• works only with the /– buttons. Pressing any number key will cancel

/TV

RETURN CHANNEL

PROGRAMMED!

Note:

Smart Sound may become an unnatural effect, depending on the signal source.

AV-48\56P775\785 (B) 63

12/20/04, 9:24:08 AM

Содержание I'Art Pro 1204TNH-II-IM

























































































Результаты поиска

Содержание I'Art Pro 1204TNH-II-IM

Отзывы:

Бренды по названию

Популярные бренды

JVC I'Art Pro 1204TNH-II-IM, Руководство пользователя

Результаты поиска

Содержание I'Art Pro 1204TNH-II-IM

Отзывы:

Бренды по названию

Популярные бренды