1-28 (No.YA387)
SUB BRIGHT
Remote
control unit
[1.Adjust]
S01: BRIGHT
• WHITE BALANCE adjustment should be finished.
(1) Receive any broadcast.
(2) Set VIDEO STATUS to
"STANDARD"
.
(3) Select COLOR TEMPERATURE to
"LOW"
.
(4) Select the
2.TV-Micro Service
from the SERVICE
MODE.
(5) Select the
1. Adjust
.
(6) Select
< S01 >
(BRIGHT).
(7) Set the initial setting value of
< S01 >
.
(8) If the brightness is not the best with the initial setting
value, make fine adjustment of
< S01 >
until you get
the optimum brightness.
(9) Press the
[MUTING]
key to memorize the set value.
SUB
CONTRAST
Remote
control unit
[1.Adjust]
S02: PICTURE
• SUB BRIGHT adjustment should be finished.
(1) Receive any broadcast.
(2) Set VIDEO STATUS to
"STANDARD"
.
(3) Select COLOR TEMPERATURE to
"LOW"
.
(4) Select the
2.TV-Micro Service
from the SERVICE
MODE.
(5) Select the
1. Adjust
.
(6) Select
< S02 >
(PICTURE).
(7) Set the initial setting value of
< S02 >
.
(8) If the contrast is not the best with the initial setting
value, make fine adjustment of the
< S02 >
until you
get the optimum contrast.
(9) Press the
[MUTING]
key to memorize the set value.
SUB COLOR
Remote
control unit
[1.Adjust]
S03 : COLOR
[ Method of adjustment without measuring instrument ]
• SUB CONTRAST adjustment should be finished.
(1) Receive any broadcast.
(2) Set VIDEO STATUS to
"STANDARD"
.
(3) Select COLOR TEMPERATURE to
"LOW"
.
(4) Select the
2.TV-Micro Service
from the SERVICE
MODE.
(5) Select the
1. Adjust
.
(6) Select
< S03 >
(COLOR).
(7) Set the initial setting value of the
< S03 >
.
(8) If the color is not the best with the initial setting
values, make fine adjustment until you get the best
color.
(9) Press the
[MUTING]
key to memorize the set value.
Signal
generator
Oscilloscope
Remote
control unit
TP-B
TP-E
[CRT SOCKET
PWB]
[1.Adjust]
S03 : COLOR
[ Method of adjustment using measuring instrument ]
• SUB CONTRAST adjustment should be finished.
(1) Input the full color bar signal includes the 75% white.
(2) Set VIDEO STATUS to
"STANDARD"
.
(3) Select COLOR TEMPERATURE to
"LOW"
.
(4) Select the
2.TV-Micro Service
from the SERVICE
MODE.
(5) Select the
1. Adjust
.
(6) Select
< S03 >
(COLOR).
(7) Set the initial setting value of the
< S03 >
.
(8) Connect the oscilloscope between
TP-B
and
TP-E
.
(9) Adjust
< S03 >
and bring the voltage of
(A)
in the
illustration to
+17V
. (voltage difference between
white and blue).
(10) Press the
[MUTING]
key to memorize the set value.
Item
Measuring
instrument
Test point
Adjustment part
Description
W
C
Y
G
R
M
B
(A)
(
)
(
)
0V
