1-26 (No.YA387)
H. POSITION /
H. SIZE /
SIDE PIN
(16:9)
Signal
generator
Remote
control unit
[1.Adjust]
D16: H SIZE+-
D04: H POSI+-
D24: EW PARA+-
D20: EWCR T+-
D22: EWCR B+-
• FORCUS adjustment should be finished.
• V. SIZE / V. POSITION adjustment should be finished.
• H. SIZE / H. POSITION / SIDE PIN adjustment should
be finished. (Regular size(4:3)).
(1) Receive the crosshatch signal.
(2) Select the ASPECT to 16:9 mode.
(3) Select the
2.TV-Micro Service
from the SERVICE
MODE.
(4) Select the
1. Adjust
.
(5) Confirm both sides of crosshatch to be the
adjustment value
90%
.
(6) If the value is not correct, adjust
< D16 >
(H SIZE+-)
and
< D04 >
(H POSI+-) so that the horizontal
screen size becomes 90% of the horizontal picture
size.
(7) Confirm the second vertical line from left and right to
be straight.
(8) If it is not straight, adjust to be straight by
< D24 >
(EW PARA+-),
< D20 >
(EWCR T+-) and
< D22 >
(EWCR B+-).
(9) Press the
[MUTING]
key to memorize the set value.
NOTE :
• Review the adjustment of 16:9 mode again when you
change the SIDE PIN adjustment value of regular
(4:3) mode.
Item
Measuring
instrument
Test point
Adjustment part
Description
Picture size 100%
Screen size