JVC hr-xvs30ek, Инструкция по эксплуатации

Страница: 66 / 84

Filename [XVS30EK_10Subsidiary.fm]
Masterpage:Left+
66
Page 66 September 2, 2003 4:59 pm
SUBSIDIARY SETTINGS (cont.)
8
POWER SAVE — ON / OFF
When this function is set to “ON”, you can reduce the power
consumption while the unit is turned off.
NOTES:
●
During Power Save mode:
— the front display panel will be turned off.
— the Just Clock function (
墌
pg. 77) does not work.
— the picture may be distorted momentarily when you turn
on/off the unit.
●
Power Save does not work when:
— the unit is in the Timer mode.
— the unit’s power is turned off after timer-recording or Instant
Timer Recording.
— the Automatic Satellite Programme Recording mode is
engaged. (
墌
pg. 28)
— “L-2 SELECT” is set to “DECODER” or “SAT”. (
墌
pg. 57)
8
VIDEO STABILIZER — ON / OFF
When this function is set to “ON”, you can automatically correct
vertical vibration in the picture when playing back unstable
recordings made on another recorder.
NOTES:
●
When you finish viewing a tape, be sure to set this function to
“OFF”.
●
Regardless of the setting, this function has no effect during
recording and during special effects playback.
●
The on-screen display may jitter vertically when this function
is set to “ON”.
●
To watch recordings with close-caption, set this function to
“OFF”.
8
S-VHS — ON / OFF
Your unit can record in S-VHS (Super VHS), S-VHS ET or
VHS.
●
To record in S-VHS:
Set “S-VHS” to “ON”. Then, insert a cassette marked “S-VHS”.
The S-VHS indicator lights up on the front display panel.
The S-VHS recording mode is selected.
●
To record in S-VHS ET on a VHS cassette:
Set “S-VHS ET” to “ON”. (
墌
pg. 64) Then, insert a cassette
marked “VHS”. The S-VHS indicator lights up on the front
display panel.
●
To record in VHS:
Insert a cassette marked “VHS”.
Set “S-VHS ET” to “OFF”. (
墌
pg. 64)
The VHS recording mode is automatically selected regardless of
the “S-VHS” mode setting.
●
To record in VHS on an S-VHS cassette:
Insert a cassette marked “S-VHS”. The S-VHS indicator lights up
on the front display panel. Then, set “S-VHS” to “OFF”. The
S-VHS indicator goes off.
The VHS recording mode is selected.
NOTE:
When playing back a tape that has been recorded in S-VHS or
S-VHS ET, the S-VHS indicator lights up on the front display
panel regardless of the “S-VHS” mode setting.
8
AUTO POWER OFF — 3H / OFF
When this function is set to “3H”, the unit is turned off
automatically if no operation is done within 3 hours. “AUTO
POWER OFF IN 3 MIN” appears on the screen 3 minutes before
the unit is turned off.
XVS30EK_01.book Page 66 Tuesday, September 2, 2003 5:01 PM