37
REFERENCE
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Symptom
Cause
Correction
No power.
•
The power cord is disconnected.
•
Plug the power cord into the wall outlet
securely.
The power is on, but the
DVD+VCR does not
work.
•
DVD or VCR button is not switched
properly.
•
Refer to page 5.
•
No disc is inserted.
•
No tape is inserted.
•
Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
No picture.
•
The TV is not set to receive DVD+VCR
signal output.
•
Select the appropriate video input
mode on the TV so the picture from the
DVD+VCR player appears on the TV
screen.
•
The video cable is not connected securely.
•
Connect the video cable into the jacks
securely.
•
Mismatch setting between TV and this
unit.
•
Select the correct Video Output in
SETUP menu.
•
Wrong connection.
•
Check the connection.
No sound.
•
The equipment connected with the audio
cable is not set to receive DVD+VCR
signal output.
•
Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD+VCR.
•
The audio cables are not connected
securely.
•
Connect the audio cable into the jacks
securely.
•
The power of the equipment connected
with the audio cable is turned off.
•
Turn on the equipment connected with
the audio cable.
•
The AUDIO options are set to the wrong
position.
•
Set the AUDIO options to the correct
position.
The playback picture is
poor.
•
The disc is dirty.
•
Clean the disc.
•
The TV channels are not tuned in
properly.
•
Check tuning, carry out tuning again.
•
Tape heads are dirty.
•
Clean video heads.
•
Tape is a rental or was recorded on
another VCR.
•
Use PR/TRK (
3
/
4
) for manual
tracking adjustment while tape is
playing.
VJ9033CP1Z_E-EK.book Page 37 Friday, March 11, 2005 9:53 AM
