background image

Page 2

July 17, 2003 8:53 am

— 2 —

Cassettes marked “VHS” (or “S-VHS”) can be used with this 
video cassette recorder. However, S-VHS recording is not 
possible with this model.

(For HR-V400AG and HR-V401AS only)
This model is equipped with SQPB (S-VHS QUASI PLAYBACK) 
that makes it possible to play back S-VHS recordings in the SP 
mode with regular VHS resolution.

HQ VHS is compatible with existing VHS equipment.

When the equipment is installed in a cabinet or a shelf, make sure 
that it has sufficient space on all sides to allow for ventilation 
(10 cm or more on both sides, on top and at the rear).

When discarding batteries, environmental problems must be 
considered and the local rules or laws governing the disposal of 
these batteries must be followed strictly.

Failure to heed the following precautions may result in damage 
to the recorder, remote control or video cassette.

1. DO NOT place the recorder ...

... in an environment prone to extreme temperatures or 
humidity.
... in direct sunlight.
... in a dusty environment.
... in an environment where strong magnetic fields are 
generated.
... on a surface that is unstable or subject to vibration.

2. DO NOT block the recorder’s ventilation openings or holes.

(If the ventilation openings or holes are blocked by a 
newspaper or cloth, etc., the heat may not be able to get out.)

3. DO NOT place heavy objects on the recorder or remote 

control.

4. DO NOT place anything which might spill on top of the 

recorder or remote control.
(If water or liquid is allowed to enter this equipment, fire or 
electric shock may be caused.)

5. DO NOT expose the apparatus to dripping or splashing.
6. DO NOT use this equipment in a bathroom or places with 

water. Also DO NOT place any containers filled with water or 
liquids (such as cosmetics or medicines, flower vases, potted 
plants, cups, etc.) on top of this unit.

7. DO NOT place any naked flame sources, such as lighted 

candles, on the apparatus.

8. AVOID violent shocks to the recorder during transport.

MOISTURE CONDENSATION

Moisture in the air will condense on the recorder when you move 
it from a cold place to a warm place, or under extremely humid 
conditions—just as water droplets form on the surface of a glass 
filled with cold liquid. Moisture condensation on the head drum 
will cause damage to the tape. In conditions where condensation 
may occur, keep the recorder’s power turned on for a few hours to 
let the moisture dry.

How to use the remote control

Before use, insert the lithium 
battery — CR2032 — correctly, 
with the plus(+) side up into the 
battery compartment. To open it, 
press the release tab and 
carefully, pull the compartment 
out.
The remote control can operate most of your recorder’s functions, 
as well as basic functions of JVC TVs.

Point the remote control towards the remote sensor on the target 
component. The maximum operating distance is about 8 m.

To operate a JVC TV, use any of the following buttons:

TV 

1

TV 

TV PR +/–

 or 

TV 

%

+/–

.

NOTE:

If the remote control does not work properly, remove its battery, 
wait for a few seconds, replace the battery and then try again.

Video heads cleaning

The heads get dirty in the following cases:

in an environment prone to extreme temperature or humidity

in a dusty environment

flaw, dirt or mold on video tapes

continuous usage for a long time

Use a dry cleaning cassette — TCL-2 — when:

Rough, poor picture appears while a tape is played back.

The picture is unclear or no picture appears.

“USE CLEANING CASSETTE” appears on the screen (only with 
“O.S.D.” set to “ON”).

Usable cassettes

Compact VHS camcorder recordings can 
be played on this recorder. Simply place 
the recorded cassette into a VHS 
Cassette Adapter and it can be used just 
like any full-sized VHS cassette.

(For HR-V400AG and HR-V401AS only)
This recorder is equipped with SQPB (S-VHS QUASI 
PLAYBACK) that lets you watch tapes recorded in the S-VHS 
format and the SP mode with regular VHS resolution.

* SQPB does not deliver Super VHS resolution.

This recorder can record on regular VHS and Super VHS 
cassettes. However, it will record regular VHS signals only.

* S-VHS recording is not possible with this recorder.

ATTENTION
To mobile phone users:

Using a mobile phone in the vicinity of the recorder may cause 
picture vibration on the TV screen or change the screen to a 
blue back display.

On placing the recorder:

Some TVs or other appliances generates strong magnetic fields.
Do not place such appliance on top of the recorder as it may 
cause picture disturbance.

Release

tab

HR-V400AG-EN.fm  Page 2  Thursday, July 17, 2003  8:53 AM

Содержание HR-V200AA

















Отзывы: