1-10
CH 1
FLASH MEMORY UTILITIES
1 ERASE DATA
2 READ AND WRITE TEST
3 EXIT
RESULT:
VCR ID:
***
LIBRALY VAR :
****
FLASH MEMORY UTILITIES
1 ERASE DATA
2 READ AND WRITE TEST
3 EXIT
RESULT:ERASED
VCR ID:
***
LIBRALY VAR :
****
FLASH MEMORY UTILITIES
1 ERASE DATA
2 READ AND WRITE TEST
3 EXIT
RESULT:PLEASE WAIT
VCR ID:
***
LIBRALY VAR :
****
Fig. 1-8-2b
Fig. 1-8-2c
Fig. 1-8-2d
Fig. 1-8-2e
1.8.3 Factory setting level during shipment
After shipment from the factory, this is the service mode to
return the rewritten EEPROM data to the factory setting level
(Factory reset).
Note:
• When this operation is executed, all user's setting con-
tents will return to the factory setting level, therefore
care must be exercised.
(1) Insert a cassette tape.
(2) Transmit the code “6F” from the Jig RCU.
(3) After a setting is completed, the cassette tape is auto-
matically ejected.
(1) Turn on the power.
(2) Transmit the code “FC” from the Jig RCU.
Then the “Flash memory utilities” screen is displayed.
(See Fig. 1-8-2c.)
(3) Transmit the code “21” from the Jig RCU.
Select “1.Erase” then erase starts. During erase “Please
wait” is displayed and when erase is completed “Erased”
will be displayed. (See Fig. 1-8-2d and Fig. 1-8-2e.)
(4) Transmit the code “23” from the Jig RCU, then the mode
is cancelled. (See Fig. 1-8-2b.)
Содержание HR-S9850EK
Страница 2: ......
Страница 6: ......
Страница 40: ...VICTOR COMPANY OF JAPAN LIMITED VIDEO DIVISION Printed in Japan S40894 ...
Страница 90: ......