42
EN
Edit To Or
From Another
Video
Recorder
You can use your video recorder as the source player or as the
recording deck.
MAKE CONNECTIONS
1
Connect the player’s 21-pin SCART connector to the
recorder’s 21-pin SCART connector as illustrated on
page 43.
A
When Using Your Video Recorder As The Source
Player ...
... connect its AV1 IN/OUT connector to the
recording deck.
B When Using Your Video Recorder As The Recording
Deck ...
... connect its AV2 IN/DECODER or AV1 IN/OUT
connector to the source player.
C If Another Recorder Is Compatible With The Y/C
Signal ...
... connect your recorder
's AV1 IN/OUT connector to
another recorder.
With C connection ...
●
When using your recorder as the recording deck, set
"AV1 SELECT" to "S-VIDEO" and "AV2 SELECT" to
"AV2" (
Z
pg. 44).
●
When using your recorder as the source player, set
the AV1 OUT switch on the rear panel to Y/C
(
Z
pg. 4).
SET RECORDING DECK’S
INPUT MODE
2
Set to AUX. With this video recorder, press NUMBER
key "0" and/or TV PROG to select “L-1” for the AV1 IN/
OUT connector, or “L-2” for the AV2 IN/DECODER
connector, depending on the connector being used.
●
When using the AV2 IN/DECODER connector, make
sure "AV2 SELECT" is set to "AV2" (
Z
pg. 44).
SET EDIT MODE
3
See "Picture Control" on page 39.
START SOURCE PLAYER
4
Engage its Play mode.
START RECORDING DECK
5
Engage its Record mode.
EDITING (cont.)
1
2
3
4
5
6
7
8
9
1
2
3
4
1
2
3
4
– –:– –
0
OK
MENU
TV PROG
NUMBER "0"