June 6, 2003 4:31 pm
Page 12
— 12 —
Master Page: Right
24H Express Timer Programming
You can programme a timer recording that starts within 24 hours.
A
Access 24HR Express Timer Programme display
Push
24H EXPRESS
#
. “ ” and start time start blinking on the
display panel.
B
Set programme start time
Turn the
JOG
dial to the left or right. Then, push the
JOG
dial.
“ ” and start time start blinking on the display panel.
●
One click stop of the
JOG
dial changes the time in 5-minute
intervals.
C
Set programme stop time
Turn the
JOG
dial to the left or right. Then, push the
JOG
dial and
channel number will start blinking.
●
One click stop of the
JOG
dial changes the time in 5-minute
intervals.
D
Set channel position
Turn the
JOG
dial to the left or right. Then, push the
JOG
dial and
channel number will start blinking.
●
You can cancel the setting at any time by pressing and holding
the
JOG
dial for more than 3 seconds. Repeat from the step
2
.
E
Engage recorder’s timer mode
Press
24H EXPRESS
#
.
The recorder turns off automatically and “
#
” appears on the
display panel.
NOTES:
●
If “Err” appears on the display panel, repeat the steps again.
●
When a menu screen is shown, you cannot use 24H Express
Timer programming function. Press
MENU
to return to normal
screen, and try again.
●
You can use 24H Express Timer programming function also
when the recorder is turned off.
●
For 24H Express Timer programming function, the program
overlap warning display does not appear even if some programs
overlap each other.
●
In case of a power failure after programming, the recorder’s
memory backup keeps your selections (if the lithium battery is
not exhausted).
Check, cancel and replace programmes
A
Disengage timer mode
Press
#
, then press
1
.
B
Access Program Check screen
Press
"
.
C
Access Program screen
Press
"
again to check more
information. Each time you press
"
, the
next programme’s information appears.
D
Cancel or replace a programme
P
ress
&
to cancel a programme.
To replace a programme, press the appropriate button:
START +/–
,
STOP+/–
,
DATE+/–
,
PR +/–
,
DAILY
,
WEEKLY
and/or
p
.
●
If you do not want to edit the programme title, skip steps
5
and
6
.
E
Access title edit screen
Press the
number key
“1”. The Title Edit
screen appears.
●
You can access the title edit screen only
when “PROG. NAVIGATION” is set to
“ON”. (
墌
15)
F
Enter programme title
P
ress the
number keys
and
PUSH JOG
e
to enter characters, then press
OK
. For
details, refer to “Entering character” on
page 14.
G
Return to normal screen
Press
"
as many times as necessary. If there are still some
programmes remaining, go on to step
8
.
H
Return to timer mode
Press
#
.
Before performing the following steps:
●
Insert a cassette with the safety tab in place. The recorder will
come on automatically.
●
Select the appropriate colour system (
墌
15).
Programme start time indicator
Programme start time indicator
Programme stop time indicator
[1] : TITLE
– P1 –
[PROG] : EXIT
[
Y
/
U
] : CURSOR
[
&
] : DELETE
[0-9] : SELECT LETTERS
: OK
24.12
8:00 PR.3
– P1 –
[PROG] : EXIT
[
Y
/
U
] : CURSOR
[
&
] : DELETE
[0-9] : SELECT LETTERS
: OK
24.12 W
HR-S5980AH.5980AJ_EN001B.fm Page 12 Friday, June 6, 2003 4:31 PM
Содержание HR-S5980AH
Страница 27: ... 27 Memo ...