1-3
Fig. 1-2-2d
z
JS3001
Q3001
FW
30
01
Q3002
D3001
b
b
b
z
c
c
b
[2] FRONT PANEL
ASSEMBLY
[2] KNOB
ASSEMBLY
from CAPSTAN MDA
BOTTOM SIDE
[2] FRONT PANEL
ASSEMBLY
TOP SIDE
WHITE LINE
CN7001
(S1a)
(L1a)
(S1a)
Before attaching TOP COVER, check to
see the wiring so that the wires should not
be damaged by TOP COVER.
(EX. FLAT WIRE of FRONT BOARD on
FRONT PANEL)
FFC WIRE and DRUM FPC WIRE should be
insert as follows.
CN
CN
CN
JS3001
(S2b)
(S2b)
(WR2a)
CN7003
(S1a)
(L1a)
[1] TOP COVER
[3] DRUM SHIELD
(S3c)
(S2a)
[3] MECHANISM
ASSEMBLY
[3] DRUM ASSEMBLY
(S3a)
(S2a)
(S3b)
(S3x)
(S3y)
(S3z)
[4] MAIN BOARD
ASSEMBLY
BOTTOM CHASSIS
(L2a)
(L4a)
(L4b)
(L2b)
(L2c)
(L2c)
(L2a)
(L2b)
OK
NG
90
°
U/U(C)/JPN
WHITE LINE
NEUTRAL
BLUE
NEUTRAL
CN5001
CN5001
from JOG
WHITE LINE
VA5001
C5001
CN5001
CN2001
(WR2a)
(WR3a)
(WR3b)
(L4c)
(L4d)
FRONT PANEL back side
NOTE)
Insert FFC EIRE to the connector
before attaching to FRONT PANEL.
[2] ADV. JOG
BOARD ASSEMBLY
back side
NOTE)
When you fix any board assembly
with the screw, put it on the jigs.
Must confirm soldering condition as no
soldering and dry soldering at portion of
Power cord lead on MAIN BOARD before
attach MAIN BOARD to BOTTOM CHASSIS.
NOTE)
Accord the position of V gap on R.ENCORDER
and PWB silk .
Accord the position of Boss on R.ENCORDER
and PWB silk .
For the prevention of the DRUM FPC damage.
When you attach the MECHANISM ASSEMBLY on BOTTOM
CHASSIS. Attach the MECHANISM ASSEMBLY after the positioning
boss "Z" of the BOTTOM CHASSIS is matched to the positioning
hole of MECHANISM ASSEMBLY.
When fixing FRONT PANEL, pay attention
don't push each SWITCHS.(FRONT PANEL
should be attached withstrength of horizontal
direction)
After fixing FRONT PANEL, check each
switching operation, button operation and click.
Don't give pressure to BOTTOM CHSSIS from
side.
NOTE)
Hang the hook of the
TOP COVER in hold of
CHASSIS.
Check to see the following items, before TOP COVER
is attached.
(1) Wires should not be touched to PRIMARY PARTS
and HEAT PARTS easily.
(2) Parts for Insulation should be attached correctly.
NOTE)
SLOT TO FIT AT THE RIB OF
THE BOTTOM CHASSIS.
NOTE)
After screwing,execute the
adjustment inspection of the
tape running.
NOTE)
Confirm the DOOR OPENER is down.
attach the FRONT PANEL after the
CASSETE DOOR is lifted up.
Hang the fook of the TERMINAL BOARD
in hole of CHASSIS.
Ensure wire dressing along by the Left side of Tuner.
right side
Ensure wire is not slunting after insert.
POWER CORD arrangement
should be following drawing.
POWER CORD should not be touch to
the VA5001 and C5001.
NOTE
Insert direction of FCC WIRE as follows.
right side
back side
electrode side
supporting side
Insert direction of POWER CORD.
except U/U(C)/JPN
Insert the wire to even the root of connector
completely at the same time as inserting each
wire.
Hang the hook of CHASSIS on the MAIN BOARD ASSEMBLY.
WIRING
back side
right side
Bend to REAR side.
Hang the hook of CHASSIS on the MAIN BOARD ASSEMBLY.
Push to release.
Push to release.
