— 4 —
Page 4
November 13, 2002 12:13 pm
Front Panel
Rear Panel
Remote
On-screen display
If you press
OSD (OK)
on the Remote when “SUPERIMPOSE” is
set to “ON” (
墌
pg. 12), you can see the current VCR status on the
TV screen. The indications are not recorded even if the VCR is in
the recording mode.
To recall an indication
Buttons, Connectors and
Indicators
S-VIDEO
Cassette loading slot
VIDEO/AUDIO input
connectors
Display panel
VCR mode
indicator
Play indicator
Record indicator
Timer mode indicator
Channel and auxiliary input/Clock time
Remote
sensor
S-VHS
indicator
S-VIDEO
input connector
S-VIDEO
AC power cord
A
Press
OSD (OK)
.
●
All indications corresponding to the current status are
displayed for 5 seconds. After that, the counter
information and RECORD/PAUSE (if in the Record Pause
mode), are left displayed on the screen.
B
Press
OSD (OK)
again to clear the display.
●
The RECORD/PAUSE indication is left displayed on the
screen.
TIMER
CANCEL
B
+
+
+
E
CH125
RECORD
THU 12:00 AM
PAUSE
STEREO –WARNING–
SP
SAP TIMER RECORDING
TO START SOON
(CANCEL)
INDEX 1
NORM
REMAIN
10:00
HI-FI
COUNT
–
1:23:45
Channel and
auxiliary input
Day and
clock time
STEREO
program
indication
SAP
indication
Audio
monitor
indications
VCR operation
mode
Tape speed
Cassette mark
Tape position
Index number
Timer warning display
Time counter
Tape
remaining time
HR-S2902U-EN-1.fm Page 4 Wednesday, November 13, 2002 12:15 PM
