background image

Filename [HRJ680EU2.fm]

Masterpage:Left

26

 

EN

TIMER RECORDING (cont.)

Express Timer 
Programming

If you don’t know the S

HOW

V

IEW

 number for the programme you 

wish to record, use the following procedure to set your recorder 
to timer-record the programme.

A

Access the S

HOW

V

IEW

 screen.

Press 

PROG

.

B

Access the Programme screen.

C

Enter the programme start time.

D

Enter the programme stop time.

Press 

STOP

 

+/–

 to enter the time you want recording to 

stop.

Press and hold 

STOP

 

+/–

 to move in 30-minute increments, or 

press and release repeatedly to move 1 minute at a time.

E

Enter the programme date.

Press 

DATE

 

+/–

The current date appears on the TV screen. The date you enter 
appears in its place.

Before performing Express Timer Programming:

Make sure that the recorder’s built-in clock is set properly.

Insert a cassette with the safety tab in place. The recorder 
will come on automatically.

Turn on the TV and select the video channel (or AV mode).

Press 

START

 

+/–

. (If you’re 

just starting out, “P1” 
appears.)

Press 

START

 

+/–

 to enter the 

time you want recording to 
start.

Press and hold 

START

 

+/–

 to 

move in 30-minute 
increments, or press and 
release repeatedly to move 1 
minute at a time.

HRJ680EU2.fm  Page 26  Friday, November 17, 2000  11:47 AM

Содержание HR-J587EU

























































Отзывы: