JVC HR-J3006UM, Инструкция по эксплуатации

Страница: 61 / 76

EN
25
1 2 3
4 5
0
6
7 8 9
•• ••
1
2
4
3
NUMBER "9"
NUMBER "8"
TIMER
SET TAPE SPEED
7
Press SP/EP to set the tape speed.
RETURN TO NORMAL
SCREEN
8
Press PROG. or OK . "PROGRAM COMPLETED"
appears on the screen for about 5 seconds, then normal
screen appears.
ENGAGE TIMER MODE
9
Press TIMER . The VCR turns off automatically and "
‰
"
is displayed on the display panel.
To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps
2 through 8 , press WEEKLY ( NUMBER
key “9”) for weekly serials or DAILY ( NUMBER key “8”) for
daily serials (Monday–Friday). Either "WEEKLY" or "DAILY"
appears on the screen. Pressing the button again makes the
corresponding indication disappear.
NOTES:
●
To disengage the timer before recording starts, press
TIMER
again. Pressing once more re-engages it.
●
In case of a power failure after programming, the VCR’s memory
backup keeps your selections for approximately 10 minutes.
●
Programs that start after midnight must have the next day’s date.
●
After timer recording is completed, the VCR’s power goes off
automatically.
●
You can program the timer while a regular recording is in
progress; the on-screen menu will not be recorded.
●
If the end of tape is reached during timer recording, the
cassette is automatically ejected.
●
When timer-recording cable or satellite channels through an
external tuner, be sure to keep the cable box or satellite
receiver's power ON.
PROG.
10:00 11:00 12:00
ATTENTION
If there is a conflict in the timer schedule and one program
overlaps with another, only the parts shown below in gray
will be recorded.
Pattern 1: The program with the lower program number
will be recorded.
Pattern 2: The program that is broadcast earlier will be
recorded.
Pattern 3: The program that is broadcast earlier will be
recorded, followed by the remaining portion of
the other program.
CH10
CH40
Not recorded
Program 1
Program 2
10:00 11:00 12:00
CH10
Program 2
Not recorded
Program 1
CH40
10:00 11:00 12:00
CH10
CH40
Program 1
Program 2
Not recorded
SP/EP
OK