1-2
1.5 HOW TO REMOVE THE MAJOR PARTS <COM section>
1.5.1 Disassembly flow chart
This flowchart shows the disassembly procedure for the ex-
terior parts and electrical parts.
Basically, reverse this procedure when assembling them.
1
Top cover, Bracket
2
Front panel assembly
Display board assembly, LED/SW board assembly,
3
Eject SW board assembly, Jack board assembly,
LED board assembly
4
SW REG board assembly
5
Regulator board assembly
6
Rear cover
<Note 1>
When attaching the FPC, be sure to connect it in the cor-
rect orientation.
<Note 2>
When attaching the front panel assy, make sure that the
door openers of cassette housing assembly is in the down
position.
<Note 3>
When attaching the FPC take care that it is not caught.
Pass the two VHS-side FPCs below the base (1).
<Note 4>
When removing the SW REG board assembly or Regula-
tor board assembly, unhook the several spacers connect-
ing it with pliers from the top side.
<Note 5>
Perform the work by leaving fan motor attached to the rear
cover except when replacing the fan motor.
When attaching the rear cover, please be careful with the
wiring.
1.5.2 Disassembly/assembly method <COM section>
Fig. COM1
7
(S2)
5
(S2)
4
(S1)
3
(S1)
6
(S2)
2
(S1)
1
(S1)
1
(L1)
(L2)
1
Top cover
8
(S3)
9
(S3)
Bracket
(L3)
(L3)
Digital board
assembly
WR2
WR1
<Note 3>
<Note 1>
Supporing
tape side
<Note 2>
Base (1)
CN7507
CN3011
2
(L3)
(L3)
Fig. COM2
Step/
Loc No.
Fig. No.
Point
Note
Part name
Top cover, Bracket
COM1
4(S1), 3(S2), 2(L1), (L2)
2(S3)
1
—
—
Front panel
assembly
COM2 8(L3),
CN7507(WR1),
CN3011(WR2)
<Note
1,2,3,4>
<Note 1,
4>
2
SW REG board
assembly
4
COM3 15(S4)
3
Display board assembly,
LED/SW board assembly,
Eject SW board assembly,
Jack board assembly,
LED board assembly
COM4 2(S5), 2(L4), (L5)
CN5301(WR3),
<Note 1,
4>
Regulator board
assembly
5
COM5 3(L6),
CN5322(WR4),
CN5321(WR5),
CN5325(WR6),
CN5326(WR7),
CN5323(WR8)
<Note 5>
Rear cover
6
COM6 4(S2), 6(S6),
Fan motor
