ENGLISH
21
IMPORT
ANT!
PREP
ARE
USE
SETTINGS
TROUBLE?
Troubleshooting
(continued)
Problem
Actions
page
Display
Functions
HDMI
Switch “Size” in “HDMI Setting” to “1” or “2”.
Wrong screen size
18
Use the cable marked with HDMI logo.
No picture, no sound
–
Check if the device is compliant with HDMI.
Switch “Audio” in “HDMI Setting” to “Digital” or “Auto” for
HDMI devices, or “Analogue” or “Auto” for DVI devices.
(Not available for “EXT-6”.)
No sound
–
18
Wait a little for the signal to stabilize when switching the
signal format for an “HDMI” device.
Green and distorted
screen
–
It is not a malfunction. Some functions (dark background) in
the menu do not work depending on the situation.
Some functions do not
work
–
“EXT-3”, “EXT-5”, “EXT-6” inputs and PC mode cannot be
selected in the sub-picture.
RGB input signal of “EXT-1” and “EXT-2” are not available in
dual-picture mode.
Some inputs cannot
be selected in the
sub-picture
–
Is the “T-V LINK” compatible device connected to “EXT-2”?
Is the SCART cable “Fully Wired”?
Is the “T-V LINK” compatible device turned on?
After confirming all the conditions above, press “OK” button
again.
“Feature Not Available”
appears
22
–
–
Press
2
to start “ACI” again.
If you still receive the “ACI Error” after numerous tries, press
3
to cancel “ACI”.
“ACI Error” appears
–
The LAMP indicator
blinks rapidly
If this condition occurs soon after replacing the lamp, reinstall
the new lamp unit. (The lamp unit may not be inserted into the
lamp housing correctly.)
Repeat the lamp installation steps, taking care to observe all
warnings.
- Make sure the lamp sits flat inside the housing area.
- Make sure the lamp cover is reinstalled.
If this condition occurs except for replacing the lamp, keep
the TV off for a while and then turn the power on again. If the
TV goes into warning mode, unplug the TV after the cooling
has completed and consult your retailer. (It may be a lamp
malfunction.)
Lamp
Problem
Actions
page
The power lamp and
LAMP indicator blink
alternately
The power lamp and
LAMP indicator blink
rapidly simultaneously
–
–
4
–
Audio signals received from EXT-5 and EXT-6 cannot be sent
to the “AUDIO OUT” terminal.
No sound from the
audio component
–
Sound
Adjust the “Bass” and “Treble”.
If receiving a poor signal in “Stereo /
t
·
u
”, switch to “Mono”.
Adjust the channel reception using “Manual”.
Poor sound
18
18
10
Keep the TV off for a while and then turn the power on again.
If the TV goes into warning mode, unplug the TV after the
cooling has completed and consult your retailer. (It may be a
malfunction of the internal electrical circuits.)
Keep the TV off for a while and then turn the power on again.
If the TV goes into warning mode, unplug the TV after the
cooling has completed and consult your retailer. (The inside
temperature rises abnormally or the fan may be blocked.)
LCT2237-001A-A.indb 21
LCT2237-001A-A.indb 21
4/5/2007 11:22:14 AM
4/5/2007 11:22:14 AM
