19
Quick Setup Connections
By connecting a Digital TV Receiver, high definition pictures can be displayed on your TV in
their digital form.
CENTER CHANNEL
INPUT
L
R
DIGITAL-IN
AV COMPULINK -
III
VIDEO
(DIGITAL)
AUDIO
(DIGITAL)
TV Rear Panel
DTV Decoder
R
L
AUDIO OUT
DIGITAL OUT
HDMI to DVI Cable
After the connections have been made,
tighten the screw to secure the cables.
Connecting to a Digital TV Receiver
1) Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder, to
the DIGITAL-IN on the back of your television.
2) Connect a red cable from the DTV decoder RIGHT AUDIO OUT, to the RIGHT AUDIO DIGI-
TAL-IN on the back of your television.
3) Connect a white cable from the DTV decoder LEFT AUDIO OUT, to the LEFT AUDIO DIGI-
TAL-IN on the back of your television.
• The digital-in terminal is not compatible with the picture signal of a personal computer.
• Use a HDMI to DVI cable (commercially available) in order to digitally connect the television
with a DTV decoder.
Notes:
• If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance
may be slightly shifted. Access the “DIGITAL-IN” in the initial setup menu to adjust it. (Refer
to page 49.)
LCT1864-001B-A ENG 19
7/15/05, 12:58:26 PM
Содержание HD-52G566
Страница 75: ...75 ...
Страница 76: ...76 ...
Страница 78: ...78 Notes ...
Страница 79: ...79 Notes ...