JVC GY-HM600E, Инструкция по эксплуатации

Страница: 139 / 148

Symptom Action
The time code and user’s bit
are not displayed.
0
Even in Camera mode or Media mode, the time code and user’s bit
may not be displayed depending to the type of display.
0
Is [LCD/VF]
B
[Display Settings]
B
[TC/UB] set to “Off”? To display
the time code or user’s bit, set it to “TC” or “UB”.
(
A
P106 [ TC/UB ] )
The date and time are not
displayed.
0
The date and time are only displayed on the Display 1 and Display 2
screens in the Camera mode (during shooting).
(
A
P119 [Display Screen in Camera Mode] )
0
Is [System]
B
[Record Set]
B
[Time Stamp] set to “On”? To display
the date and time, set it to “Off”.
(
A
P114 [ Time Stamp ] )
Incorrect display on the
viewfinder.
Is the LCD monitor used with [LCD/VF]
B
[LCD + VF] set to “Off”?
(
A
P103 [ LCD + VF ] )
The actual recording time is
shorter than the estimated
time.
0
The recordable time may be shorter depending on the shooting
conditions or the subject.
The two camera recorders are
not synchronized even though
the time codes have been
synchronized. (
Z
on the Slave
device is not displayed.)
0
Is the [TC IN/OUT] switch correctly set?
(
A
P68 [Synchronizing Time Code on Another Camera] )
0
Set [System]
B
[Record Set]
B
[Record Format]
B
[Frame & Bit
Rate] such that the two camera recorders have the same frame rate.
(
A
P112 [ Frame & Bit Rate ] )
139
Others