CONTROLS, INDICATORS AND CONNECTORS
16
Left Side Section
1
Viewfinder connector (6-pin)
Connect the cable from the viewfinder here.
• Set the image format for this terminal in VF SIGNAL on
the LCD/VF[4/4] menu screen.
X
See page 92.
2
[CH-2 INPUT] CH-2 audio input connector selector
switch
Selects the CH-2 audio input connector.
MEMO
The audio from the INPUT1 connector is also input into
CH-1 regardless of the setting.
3
[AUDIO INPUT] Audio input signal selector switch
This switch is used to select the input sound signal from
INPUT1 or INPUT2 connector.
CAUTION
When connecting a component that does not r48 V
power supply, make sure that the switch is not set to
MIC+48V before the component is connected.
MEMO
You can select the normal input level for MIC and MIC+48V
in the INPUT1, 2 MIC REF. item on the AUDIO/MIC[1/2]
menu screen.
X
See page 87.
4
[INPUT1/INPUT2] INPUT1/INPUT2 audio input connec-
tors
These are audio input connectors for connecting to an
external audio device or microphone.
• Set the [AUDIO INPUT] switch
3
according to the
device to be connected.
• Set the CH-2 audio input connector using the [CH-2
INPUT] switch
2
.
The CH-2 audio from the set connector is recorded.
5
Shoulder pad slide button
Button to adjust the position of the shoulder pad.
When you press this button, you can move the position of
the shoulder pad
6
forward or backward.
6
Shoulder pad
7
Cassette cover
Sliding the EJECT switch
a
on page 18 located on the
top section opens this cover to allow insertion or removal
of the videocassette.
CAUTION
To prevent foreign objects from entering the internal parts of
the VTR unit, do not leave this device with the cover open
for extended periods of time.
8
[VIDEO OUT] Video output terminal (RCA)
This is a terminal for composite video signal output.
• Select whether or not to output a signal with setup in
SET UP on the VIDEO FORMAT[2/2] menu screen.
(Only for U model)
9
[AUDIO OUTPUT CH-1/CH-2] Audio output connector
(RCA)
Output connector for audio signals.
• Outputs the input audio signal in the Camera mode.
• Outputs the playback audio signal in the VTR mode.
• When a HDV/DV signal (IEEE1394) is input, the EE
sound of the input audio signal is output in the VTR
mode.
MEMO
Alarm sound is not output.
0
[IEEE1394] IEEE1394 connector (6-pin)
Using an IEEE1394 cable (optional), a digital video com-
ponent with IEEE1394 connector can be connected here.
X
See “Connecting the IEEE1394 Cable” on page 64.
X
See “HDV/DV Dubbing” on page 68.
CAUTION
When connecting the IEEE1394 cable, confirm that the
connector is facing the right direction before inserting.
X
See page 64.
MEMO
Put the covers on the connectors when you are not using
them.
INPUT1
: Inputs the audio from the INPUT1 connector
4
into CH-2.
INPUT2
: Inputs the audio from the INPUT2 connector
4
into CH-2.
LINE
: Set to this position when connected to audio
equipment, etc. The reference input level is
+4 dBs.
MIC
: Set to this position when the dynamic micro-
phone is connected.
MIC+48V : Set to this position when a microphone
req48 V power supply (phantom
microphone, etc.) is connected.
IEEE 1394
CH2-AUDIO OUT-CH1 VIDEO
0
9
8
7
1
2
3
4
5
6
17
a
[STUDIO] Studio terminal (Round 10-pin)
Connect the studio cable from the KA-HD250 Studio Kit
(sold separately). Connect the KA-HD250 to use this
device as a studio camera.
For details, refer to the KA-HD250 INSTRUCTION MAN-
UAL.
b
[DC INPUT] DC input terminal (XLR 4-pin)
This is the 12V DC power input terminal. Connect to the
AC adapter.
When a battery is installed and a cable is connected to this
terminal, power supply from the battery stops and power is
supplied by this terminal.
c
[GENLOCK/AUX IN] GENLOCK/AUX IN switch
Set according to the signal input in the [GENLOCK/AUX
IN] terminal.
GENLOCK : Set to this when inputting external synchroni-
zation signals.
AUX IN
: Set to this when inputting composite video
signals from an external device.
MEMO
If no signals are input to the [AUX IN] terminal and this
switch is set to AUX IN, the monitor turns black and video is
not output from any terminal.
d
[P
B
P
R
/TC] P
B
P
R
/Time code switch
Set according to the [P
B
/TC IN] and [P
R
/TC OUT] terminal
signals.
P
B
P
R
: Set to this when outputting component P
B
signals
from the [P
B
/TC IN] terminal and outputting com-
ponent P
R
signals from the [P
R
/TC OUT] terminal.
TC
: Set to this when inputting LTC time code from the
[P
B
/TC IN] terminal and outputting the built-in time
code generator from the [P
R
/TC OUT] terminal.
MEMO
When this switch is set to TC, video is not output from the
Y/P
B
/P
R
terminal (
i j k
).
e
[IEEE1394] IEEE1394 switch
Set according to the image format of the input/output sig-
nal and playback signal of the IEEE1394 terminal.
HDV : Set to this for HDV format.
DV
: Set to this for DV format.
f
[REMOTE] REMOTE terminal (Round 6-pin)
Some functions of this camera can be controlled exter-
nally.
Connect to a remote control unit (RM-LP55/RM-LP57).
X
See “Connect a Remote Control Unit (RM-LP55/RM-
LP57)” on page 71.
g
[GENLOCK/AUX IN] GENLOCK/AUX IN terminal (BNC)
• Input synchronization signals in this terminal when
externally synchronizing camera images or playback
images.
Synchronization signal: BB (Black Burst) signal of SD
or Tri sync signal of HD
• Input composite video signals to record images from an
external device with this device.
• Select the signal to input with the [GENLOCK/AUX IN]
switch
c
.
X
See “Using GENLOCK Functions” on page 66.
X
See “Recording Composite Video Signals from an
External Device” on page 65.
h
[HD/SD-SDI] HD/SD-SDI output terminal (BNC)
Outputs HD/SD-SDI (Serial Digital Interface) signals. Out-
puts embedded audio signals as digital audio.
The sampling frequency for embedded audio is 48 kHz.
In addition, the time code for the built-in time code genera-
tor and playback time code are output.
X
See pages 20 and 21 for the signals that are enabled.
MEMO
Set whether or not to output SDI signals from this terminal
in HD/SD-SDI OUT of the VIDEO FORMAT[2/2] menu
screen.
i
[Y] Component Y signal output terminal (BNC)
Outputs Y signal of component when the [P
B
P
R
/TC] switch
d
is set to P
B
P
R
.
j
[P
B
/TC IN] Component P
B
signal output/time code
input terminal (BNC)
• Outputs P
B
signal of component when the [P
B
P
R
/TC]
switch
d
is set to P
B
P
R
.
• Inputs time code when the [P
B
P
R
/TC] switch
d
is set to
TC. Enter the LTC time code to slave lock this device’s
time code generator with an external time code genera-
tor.
MEMO
Set TCG SOURCE on the TC/UB/CLOCK Menu screen to
EXTERNAL to input external time codes.
X
See “Synchronizing with an External Time Code Gener-
ator” on page 49.
k
[P
B
/TC OUT] Component P
B
signal output/time code
output terminal (BNC)
• Outputs P
R
signal of component when the [P
B
P
R
/TC]
switch
d
is set to P
B
P
R
.
• Outputs the LTC time code of the built-in time code gen-
erator when the [P
B
P
R
/TC] switch
d
is set to TC.
MEMO
Set the [Y/P
B
/P
R
] terminal (
i j k
) output image signal to
RGB or Y/C video signals in OUTPUT TERM. [DV] on the
VIDEO FORMAT[2/2] menu screen. (Only for DV format)
X
See “OUTPUT TERM. [DV]” on page 79.
IEEE 1394
CH2-AUDIO OUT-CH1 VIDEO
g
b
c d e
f
j
i
h
k
a
