JVC GV-LS1 U, Руководство пользователя

Страница: 29 / 127

13
P
re
p
ar
ati
on
Configuring the initial settings
To configure the settings for the first time after
purchase, connect the camera directly to your computer
via a LAN cable.
1 Connect the camera to your computer via the
LAN cable. (
➭
page 25)
2 Press and hold the power button to power on.
The record button starts blinking. Wait until it stops
blinking and off.
3 Configure the network settings for the computer
as follows:
• IP ADDRESS
Other than 192.168.1.100 within the range of
192.168.1.2 to 192.168.1.254
(Example) 192.168.1.23
• SUBNET MASK
255.255.255.0
CAUTION
To restore the settings of your computer after
confirming the performance and completing the
settings, write down the current settings before
changing them.
4 Start Internet Explorer, and enter
"http://192.168.1.100:8000" in the address bar.
5 Enter the user name and password of the
administrator.
Initial setting: USERNAME "root", PASSWORD
"password".
If login is successful, the setup screen appears.
• To configure the settings only to start using the
unit, refer to "Configuring the Camera Settings"
(page 15), "Selecting a Format of Images to
be Streamed/Saved" (page 17), "Allowing You
to Connect from Outside (Monitoring Setting)"
(page 18), and "Changing the Connection
Destination" (page 20).
• To confirm all the settings, refer to "Setting Item
List" (page 39).
Configuring the Camera Settings Appropriate for Your Needs
Access the unit from your computer to set the network, streaming, etc.
Required operating environment
Browser: Internet Explorer 9 or later