JVC GV-LS1 U Скачать руководство пользователя страница 2

2

For more details, refer to the Detailed User Guide at http://manual3.jvckenwood.com/

Safety Precautions

         

 

NOTES:

•  The rating plate and safety caution are on the 

bottom and/or the back of the main unit.

•  The serial number plate is on the battery pack 

mount.

•  The rating information and safety caution of the AC 

adapter are on its upper and lower sides.

Make a backup of important recorded data

JVC will not be responsible for any lost data.
It is recommended to copy your important recorded 
data to a disc or other recording media for storage 
once every 3 months.

WARNING:

The battery pack and the camcorder with battery
installed should not be exposed to excessive heat
such as direct sunlight, fi re or the like.

When the equipment is installed in a cabinet or on
a shelf, make sure that it has suffi cient space on all 
sides to allow for ventilation (10 cm (3-15/16") or 
more on both sides, on top and at the rear).
Do not block the ventilation holes.
(If the ventilation holes are blocked by a newspaper, 
or cloth etc. the heat may not be able to get out.)
No naked fl ame sources, such as lighted candles, 
should be placed on the apparatus.
When discarding batteries, environmental problems 
must be considered and the local rules or laws 
governing the disposal of these batteries must be 
followed strictly.

Do not point the lens directly into the sun. This 
can cause eye injuries, as well as lead to the 
malfunctioning of internal circuitry. There is also a risk 
of fi re or electric shock.

CAUTION!

The following notes concern possible physical 
damage to this unit and to the user.
Do not use a tripod on unsteady or unlevel surfaces.
It could tip over, causing serious damage to the unit.

CAUTION!

Connecting cables (Audio/Video, etc.) to this unit 
and leaving it on top of the TV is not recommended, 
as tripping on the cables will cause this unit to fall, 
resulting in damage.

CAUTION:

The mains plug shall remain readily operable.
•  Remove the mains plug immediately if the 

camcorder functions abnormally.

CAUTION:

•  Dispose of used batteries according to the 

instructions.

•  Risk of explosion if battery is replaced by an 

incorrect type.

WARNING

For PLUGGABLE EQUIPMENT, the socket outlet 
shall be installed near the equipment and shall be 
easily accessible.

The lightning fl ash with arrowhead symbol, within 
an equilateral triangle, is intended to alert the user 
to the presence of uninsulated "dangerous voltage" 
within the product's enclosure that may be of 
suffi cient magnitude to constitute a risk of electric 
shock to persons.

The exclamation point within an equilateral triangle 
is intended to alert the user to the presence of 
important operating and maintenance (servicing) 
instructions in the literature accompanying the 
appliance.

For USA-California Only

This product contains a CR Coin Cell Lithium
Battery which contains Perchlorate Material
– special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate

GVLS1̲basic̲US.indd   2

GVLS1̲basic̲US.indd   2

12/12/04   10:16

12/12/04   10:16

Содержание GV-LS1 U
































































































































Отзывы: