background image

58

 EN

I T E M S

N O T E S

Perform charging where the temperature is between 10°C and 35°C
(50°F and 95°F). 20°C to 25°C (68°F to 77°F) is the ideal
temperature range for charging. If the environment is too cold,
charging may be incomplete.

Charging times are for a fully discharged battery pack.

Charging time varies according to the ambient temperature and the
status of the battery pack.

To avoid interference with reception, do not use the AC Adapter
near a radio.

Since the AC Adapter processes electricity internally, it becomes
warm during use. Be sure to use it only in well-ventilated areas.

The following operation stops charging or discharging:

Set the Power Switch to “

”, “

” or “

”.

Disconnect the AC Adapter from the camcorder.

Unplug the AC Adapter’s power cord from the AC outlet.

Detach the battery from the camcorder.

The date/time cannot be stored in memory if the built-in clock
battery runs out. Consult an authorized JVC dealer for replacement,
or set the date/time as necessary before you start shooting.

DETAILS

Date/Time
Settings
(

 pg. 11)

Power
(

 pg. 8)

Содержание GR-SXM530













































































Отзывы: