1-16 (No.86772)
3.2.3
DISASSEMBLY/ASSEMBLY OF [7] VF ASSEMBLY
z
Disassembly of VF ASSEMBLY
(1) Remove the two screws (1 and 2), and remove the EYE
CUP.
(2) Remove the four screws (3-6), and make the SWITCH
BOARD ASSEMBLY (PUSH SWITCH) and FPC AS-
SEMBLY (VF) move easily.
(3) Remove the four screws (7-10), and remove the FPC
ASSEMBLY (VF) from the HOLDER ASSEMBLY (VF)
while lifting the VF CASE (TOP COVER and BOTTOM
COVER ASSEMBLY) upwards.
NOTE7a:
During the procedure, be careful not to damage or cut
the FPC ASSEMBLY (VF) since it is attached to the
HOLDER ASSEMBLY (VF).
(4) Remove the two screws (11 and 12), and remove the
TOP COVER.
(5) Remove the whole LCD UNIT from the BOTTOM COV-
ER ASSEMBLY.
(6) Remove one screw (13), and remove the LEVER
(LENS), HOLDER (LENS) ASSSEMBLY, LINK (LENS),
and SPACER B.
NOTE7b:
When attaching the VF ASSEMBLY, confirm that the
HOLDER (LENS) ASSEMBLY slides properly.
Fig.3-2-3
∗
0.069N·m (0.7kgf·cm)
∗∗
0.078N·m (0.8kgf·cm)
∗∗∗
0.059N·m (0.6kgf·cm)
∗∗
12
(S7f)
∗∗
11
(S7f)
∗∗∗
13
(S7g)
∗
2
(S7c)
∗
1
(S7c)
∗∗
10
(S7f)
∗∗
8
(S7e)
∗∗
7
(S7e)
∗∗
9
(S7f)
∗∗
3
(S7c)
∗∗
4
(S7d)
6
(S7d)
∗∗
5
(S7d)
SPACER B
LINK
(LENS)
LEVER (LENS)
BOTTOM COVER ASSEMBLY
NOTE7b
HOLDER (LENS)
ASSEMBLY
EYE CUP
TOP COVER
LCD UNIT
FPC ASSEMBLY (VF)
HOLDER (VF) ASSEMBLY
SWITCH
BOARD
ASSEMBLY
NOTE7a
