JVC GR-DVX8, Инструкция по эксплуатации

Страница: 62 / 80

62
EN
TROUBLESHOOTING
(cont.)
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
25. •“DATE/TIME” is set to
“OFF” in the Menu Screen.
•Self-Recording is performed.
26. •“ON SCREEN” is set to
“SIMPLE” or “TIME CODE”
is set to “OFF” in the Menu
Screen.
27. •In places subject to low
temperature, images become
dark due to the characteris-
tics of the LCD monitor.
When this happens, the
displayed colours differ from
those that are actually
recorded. This is not a defect
of the camcorder.
•When the LCD monitor's
fluorescent light reaches the
end of its service life, images
on the LCD monitor become
dark. Consult your nearest
JVC dealer.
28. •The light used to illuminate
the LCD monitor causes it to
become hot.
29. •This may occur when the
surface or the edge of the
LCD monitor is pressed.
30. •Certain Fade/Wipe effects,
certain modes of Programme
AE with special effects, “DIS”
and other functions that
cannot be used together are
selected at the same time.
31. •The LCD monitor and the
viewfinder are made with
high-precision technology.
However, black spots or
bright spots of light (red,
green or blue) may appear
constantly on the LCD
monitor or the viewfinder.
These spots are not
recorded on the tape. This is
not due to any defect of the
unit. (Effective dots: more
than 99.99 %)
25. •Set “DATE/TIME” to “ON”
in the Menu Screen
(
墌
pg. 25).
•During Self-Recording, the
date/time does not appear
(
墌
pg. 15).
26. •Set “ON SCREEN” to “LCD”
or “LCD/TV” and set “TIME
CODE” to “ON” in the Menu
Screen (
墌
pg. 25, 35).
27. •Adjust the brightness and
angle of the LCD monitor
(
墌
pg. 14, 15).
28. •Close the LCD monitor to
turn it off or set the POWER
Switch to “OFF”, and let the
unit cool down.
29.
————
30. •Re-read the sections
covering Fade/Wipe effects,
Programme AE with special
effects and “DIS”
(
墌
pg. 24, 28 – 31).
31.
————
25. During recording, the date/
time does not appear.
26. The indicators and
messages do not appear.
27. Images on the LCD
monitor appear dark or
whitish.
28. The rear of the LCD
monitor is hot.
29. The indicators and the
image colour on the LCD
monitor are not clear.
30. The LCD monitor or
viewfinder indications
blink.
31. Coloured bright spots
appear all over the LCD
monitor or the viewfinder.