EN
35
1 9
0 0
0 0
0 0
0 0
0 3
0 0
2 0
2 1
2 3
2 2
E X I T
100-DVC00021
VGA
2 4
D P O F
SE ECT
L
–
EXECUTE
CANCEL
DPOF
PL
AY
OF
F
TO PRINT BY SELECTING STILL IMAGES
AND NO. OF PRINTS
1
Perform steps
1
through
4
on pg. 34.
2
Rotate the
MENU
Wheel to select “SELECT” and
press it. Selection is complete. The DPOF Index
Screen appears.
3
Rotate the
MENU
Wheel to move the green frame to
the image you wish to print and press it.
4
Select the number of prints by rotating the
MENU
Wheel towards “
+
” to increase the number, or
towards “
–
” to decrease the number and press it.
Repeat steps
3
and
4
for the desired number of
prints.
•The number of prints can be set up to 15.
•To correct the number of prints, select the image
again and change the number.
5
Rotate the
MENU
Wheel upward to select “EXIT”
and press it. Selection is complete. The
Confirmation Screen appears.
6
Rotate the
MENU
Wheel to select “EXECUTE” and
press it. The normal playback screen appears.
•To cancel selection, rotate the
MENU
Wheel to
select “CANCEL” and press it.
To Reset The No. Of Prints . . .
.... select “RESET” in step
5
on pg. 34. The number of
prints is reset to 0 for all still images.
MENU Wheel
DPOF Index
Screen
NOTES:
●
If you load a memory card already set as shown above
in a printer compatible with DPOF, it will make prints
of the selected still images automatically.
●
To print images recorded on a tape, first dub them to a
memory card (
Z
pg. 60).
CAUTION:
While performing the above, never disconnect power,
as this may cause the memory to be corrupted.
Display
Confirmation
Screen
Power Switch
Lock Button
Number of prints
