EN
59
Master Page: Right
GR-DVP7U_37-79.fm
Page 59
To add thumbnail images during tape
playback
1
Perform steps
1
to
4
of “To find scenes on tape
using thumbnail images (NAVIGATION Search)”.
2
Set “
COPY” to “NAVIGATION”.
(
墌
pg. 38)
3
Press
4
/
9
to start tape playback.
4
Press
SNAPSHOT
at the desired point.
●
The “
” indicator appears and the image of
the point where
SNAPSHOT
is pressed is
stored on the memory card as a thumbnail
image.
To delete thumbnail images
1
Load a memory card. (
墌
pg. 17)
2
Set the
VIDEO/MEMORY
switch to “VIDEO”.
3
Set the Power Switch to “
P
” while pressing
down the Lock Button located on the switch.
4
Press
MENU
. The Menu Screen appears.
5
Press
+
or
–
to select “
t
VIDEO”, and press
SET/SELECT
. The VIDEO Menu appears.
6
Press
+
or
–
to select
“NAVI.DEL.”, and
press
SET/SELECT
. The
Sub Menu appears.
7
By pressing
+
or
–
...
Select “IMAGE SEL.” to
delete the currently
displayed thumbnail image.
Select “TAPE SEL.” to delete all thumbnail images
for the tape which contains the currently
displayed image.
Select “ALL” to delete all thumbnail images
stored on the memory card at once.
8
Press
SET/SELECT
. The
NAVIGATION screen
appears.
9
Press
+
or
–
to select
“EXECUTE”, and press
SET/SELECT
.
●
Turn the
SHUTTLE
SEARCH
Ring to the
left (
3
) to display the previous page. Turn
the
SHUTTLE SEARCH
Ring to the right (
5
)
to display the next page.
●
To cancel deletion, select “RETURN”.
●
Thumbnail images cannot be deleted during
tape playback.
CAUTION:
Do not remove the memory card or perform any
other operation (such as turning off the camcorder)
during deletion. Also, be sure to use the provided
AC Power Adapter/Charger, as the memory card may
be corrupted if the battery becomes exhausted
during deletion. If the memory card becomes
corrupted, initialize it.
NOTE:
Once images are deleted, they cannot be restored.
Check images before deleting.
IMPORTANT
●
Be sure to always use the same tape and memory
card together as they were during recording;
otherwise, the camcorder cannot recognize Tape
and Memory Card IDs to perform NAVIGATION
function properly.
●
Check if an appropriate tape and memory card are
loaded when the following messages appear: “NO
ID ON TAPE OR CARD”, “UNABLE TO USE
NAVIGATION”, “THIS MEMORY CARD IS NOT
COMPATIBLE”.
●
If you change the memory card while shooting on
one tape, two memory cards will share the tape’s
thumbnail images. We recommend that you use
one memory card for one tape.
●
NAVIGATION Search does not work if the current
position is at a blank portion on the tape. Also, do
not leave a blank portion partway through the tape
when shooting; otherwise, NAVIGATION function
does not work properly.
●
Before shooting newly over a recorded tape, be
sure to delete all thumbnail images of the previous
recording from the relevant memory card.
●
If you copy thumbnail images from one memory
card to another via a PC, NAVIGATION Search
does not work with the copied memory card.
M D
O E
SOUND
M D
O E
12B I T
RO
SYNCH
ODE
REC M
DE
.
.
NAV I
L
COPY
STEREO
–
SOUND 1
SP
OF F
–
–
–
NP UT
S /AV I
OFF
–
–
N
RETUR
O . O
I G
N
A
NAV
T I O
ETE
DEL
CURRENT ?
EXECUTE
RETURN
3
Y
A
M
:
2
0
6
0
’ 0
A
2
M
GR-DVP7U_37-79.fm Page 59 Tuesday, March 5, 2002 4:13 PM
Downloaded From VideoCamera-Manual.com Manuals
