8
EN
PAUSE
3
1
2
Grip Adjustment
1
Separate the Velcro strip.
2
Pass your right hand through the loop and grasp
the grip.
3
Adjust so that your thumb and fingers can easily
operate the Recording Start/Stop Button and
Power Zoom Lever. Refasten the Velcro strip.
Viewfinder Adjustment
1
1
Set the Power Switch to “
” or “
” while
pressing down the Lock Button located on the
switch. Set the Shooting Mode Dial to any
position.
2
Pull out the viewfinder fully and adjust it
manually for best viewability.
3
Slide the Dioptre Adjustment Control until the
indications in the viewfinder are clearly
focused.
Recording Start/
Stop button
Power Zoom Lever
Dioptre Adjustment
Control
Power Switch
GETTING STARTED
(cont.)
Shooting Mode Dial
Shoulder Strap Attachment
1
Following the illustration, thread the strap
through the eyelet
1
, then fold it back and
thread it through the buckle
2
. Repeat the
procedure to attach the other end of the strap to
the other eyelet
3
, making sure the strap is not
twisted.
CAUTION:
When using a tripod, be sure to open and
extend its legs fully to stabilise the
camcorder. To prevent damage to the unit
caused by falling over, do not use a small-
sized tripod.
Tripod Mounting
1
Align the screw and camera direction stud on
the tripod with the camera’s mounting socket
and stud hole. Then tighten the screw.
•Some tripods are not equipped with studs.
