background image

EN 

9

ATTENTION

Before detaching the power source, make sure that
the camcorder’s power is turned off. Failure to do so
can result in a camcorder malfunction.

NOTES:

Recording time is reduced significantly under the
following conditions:
• Zoom or Record-Standby mode is engaged

repeatedly.

• The LCD monitor is used repeatedly.

The playback mode is engaged repeatedly.

Before extended use, it is recommended that you
prepare enough battery packs to cover 3 times the
planned shooting time.

USING THE BATTERY PACK

Perform step 

1

 of “CHARGING THE BATTERY

PACK” (

 pg. 8).

Approximate recording time

USING AC POWER

Use the AC Adapter (connect as shown in the
illustration).

NOTES:

The provided AC Adapter features automatic voltage
selection in the AC range from 110 V to 240 V.

For other notes, 

 pg. 47.

Battery
pack

BN-V408U

BN-V416U
(optional)

BN-V428U
(optional)

BN-V840U
(optional)

BN-V856U
(optional)

LCD monitor on

1 hr.

2 hrs.

3 hrs. 30 min.

5 hrs.

7 hrs.

Viewfinder on

1 hr. 15 min.

2 hrs. 30 min.

4 hrs. 20 min.

6 hrs. 10 min.

8 hrs. 40 min.

INFORMATION

The extended-use battery pack kit is a set composed of a battery pack and AC Power Adapter/Charger:
VU-V840 KIT : BN-V840U battery pack & AA-V15EG or AA-V15EK AC Power Adapter/Charger
VU-V856 KIT : BN-V856U battery pack & AA-V80EG or AA-V80EK AC Power Adapter/Charger
Read the kit's instruction manual before using.
Also, by using the optional JVC VC-VBN856U DC Cord, it will be possible to connect BN-V840U or BN-V856U
battery packs to the camcorder and supply power directly to the camcorder.

Lithium-ion is vulnerable in colder temperatures.

About Batteries

DANGER!

 Do not attempt to take the batteries apart,

or expose them to flame or excessive heat, as it may
cause a fire or explosion.

WARNING!

 Do not allow the battery or its terminals

to come in contact with metals, as this can result in a
short circuit and possibly start a fire.

The Benefits Of Lithium-Ion Batteries

Lithium-ion battery packs are small but have a large
power capacity. However, when one is exposed to
cold temperatures (below 10°C), its usage time
becomes shorter and it may cease to function. If this
happens, place the battery pack in your pocket or
other warm, protected place for a short time, then re-
attach it to the camcorder. As long as the battery pack
itself is not cold, it should not affect performance.

(If you’re using a heating pad, make sure the battery
pack does not come in direct contact with it.)

To DC
connector

To AC outlet

AC Adapter

Содержание GR-DVL145

































































Отзывы: