MENUS FOR DETAILED ADJUSTMENT
38
EN
MasterPage: Left
MANUAL
The “
q
MANUAL” settings are effective only
when the Power Switch is set to “
M
”.
[ ]
= Factory-preset
OFF
: Disables the function.
[ON
]
: To compensate for unstable images
caused by camera-shake, particularly at high
magnification.
NOTES:
●
Accurate stabilization may not be possible if hand
shake is excessive, or depending on the shooting
condition.
●
The “
” indicator blinks or goes out if the
Stabilizer cannot be used.
●
Switch off this mode when recording with the
camcorder on a tripod.
[OFF]
: Disables 5-Second Recording.
5S
: Enables 5-Second Recording. (
墌
pg. 42)
Anim.
: Allows you to record a few frames only.
By using an inanimate object and changing its
position between shots, you can record the
subject as though it is moving.
[OFF]
: Disables the function.
ON
: When the distance to the subject is less
than 1 m (3.3 ft), set “TELE MACRO” to “ON”.
You can shoot a subject as large as possible at a
distance of approx. 60 cm (23-5/8").
NOTE:
Depending on the zoom position, the lens may go out
of focus.
[OFF]
: Records with no change in the screen
ratio. For playback on a TV with a normal screen
ratio.
CINEMA
*
: Inserts black bands at the top and
bottom of the screen. The
indicator appears.
During playback on wide-screen TVs, the black
bands at the top and bottom of the screen are
cut and the screen ratio becomes 16:9. When
using this mode, refer to your wide-screen TV’s
instruction manual. During playback/recording
on 4:3 TVs/LCD monitor/viewfinder, black bands
are inserted at the top and bottom of the screen
and the image appears like a letter boxed 16:9
movie.
SQUEEZE
*
: For playback on TVs with an
aspect ratio of 16:9. Naturally expands the
image to fit the screen without distortion. The
indicator appears. When using this mode,
refer to your wide-screen TV’s instruction
manual. During playback/recording on 4:3 TVs/
LCD monitor/viewfinder, the image is elongated
vertically.
* Available only when the
VIDEO/MEMORY
Switch
is set to “VIDEO”. (GR-DF470/450 only)
[OFF]
: Disengages the function.
ON
: Helps cut down on noise created by
wind. The “
” indicator appears. The quality of
the sound will change. This is normal.
SYSTEM
The “
s
SYSTEM” functions which are set when
the Power Switch is set to “
M
” are also applied
when the Power Switch is set to “PLAY”.
[ ]
= Factory-preset
OFF
: Even though not heard while shooting,
shutter sound is recorded on the tape.
BEEP
: The beep sounds when the power is
turned on or off, and at the beginning and end of
recording. It also activates the shutter sound
effect. (
墌
pg. 27, 43)
[MELODY]
: Instead of a beep, a melody sounds
when any operation is performed. It also
activates the shutter sound effect.
(
墌
pg. 27, 43)
OFF
: Disables the remote control operations.
[ON]
: Enables the remote control operations.
DIS
5S
TELE MACRO
WIDE MODE
WIND CUT
BEEP
REMOTE
GR-DF470-450US.book Page 38 Thursday, February 24, 2005 11:26 AM
