1-16 (No.YF219)
•
Chip IC replacement jig
To be used for adjustment of the camera system.
•
Cleaning cloth
Recommended the Cleaning cloth to wipe down the video
heads, mechanism (tape transport system), optical lens sur-
face.
•
Guide driver
To be used to turn the guide roller to adjustment of the linarity
of playback envelope.
•
INF adjustment lens
To be used for adjustment of the camera system. For the
usage of the INF adjustment lens, refer to the Service Bulletin
No. YA-SB-10035.
•
INF adjustment lens holder
To be used together with the Camera stand for operating the
Videocamera in the stripped-down condition such as the sta-
tus without the exterior parts or for using commodities that are
not yet conformable to the interchangeable ring. For the usage
of the INF lens holder, refer to the Service Bulletin No. YA-SB-
10035.
•
Mini stand
To be used together with the INF adjustment lens holder. For
the usage of the Mini stand, refer to the Service Bulletin No.
YA-SB-10035.
•
Light box assembly
To be used for adjustment of the camera system. For the
usage of the Light box assembly, refer to the Service Bulletin
No. YA-SB-10035.
•
Gray scale chart
To be used for adjustment of the camera system. For the
usage of the INF adjustment lens, refer to the Service Bulletin
No. YA-SB-10035.
•
Color bar chart
To be used for adjustment of the camera system. For the
usage of the INF adjustment lens, refer to the Service Bulletin
No. YA-SB-10035.
•
Focus chart
To be used for adjustment of the camera system. For the
usage of the INF adjustment lens, refer to the Service Bulletin
No. YA-SB-10035.
•
Alignment tape
To be used for check and adjustment of interchangeability of
the mechanism.
•
Service support system
To be used for adjustment with a personal computer. Software
can be downloaded also from JS-net.
•
PC cable
To be used to connect the Videocamera and a personal computer
with each other when a personal computer issued for adjustment.
•
Communication cable
Connect the Communication cable between the PC cable and
Jig connector cable when performing a PC adjustment.
•
Jig connector cable
Connected to JIG CONNECTOR of the main board and used
for electrical adjustment, etc.
•
Charging Battery Adjustment Jig
This Jig is used for the adjustment of the camcorders that have
Main Body battery charging function.
4.2
JIG CONNECTOR CABLE CONNECTION
Connection procedure
Remove the COVER (JIG), and remove the COVER (AD-
JUST).
Fig.4-2-2
GUIDE ROLLER (TU)
GUIDE ROLLER (SUP)
PC CABLE
COVER(JIG )
COVER(ADJUST )
JIG CONNECTOR
COMMUNICATION
CABLE
COMMUNICATION
JIG CONNECTOR
CABLE
JIG CONNECTOR
TO ENV_OUT
TO HID
MENU
RS232C
COM PORT
SERVICE SUPPORT SYSTEM
OSCILLOSCOPE
JIG CONNECTOR
PERSONAL COMPUTER
CABLE
TO AL_2.8VSYS
TO IF_RX
TO IF_TX
TO GND
BLUE
RED
WHITE
BLACK
