EN
43
Connections/Editing
ENGLISH
4
1
2
3
4
5
6
7
8
9
Connection To A Personal
Computer
When connecting the camcorder to a PC
using a DV cable, make sure to follow the
procedure below. Connecting the cable
incorrectly may cause malfunctions to the
camcorder and/or the PC.
•
Connect the DV cable fi rst to the PC, and
then to the camcorder.
•
Connect the DV cable (plugs) correctly
according to the shape of the DV connector.
[A] Using USB cable
It is possible to transfer still images stored on
a memory card to a PC.
[B] Using DV cable
It is also possible to transfer still/moving
images to a PC with a DV connector by using
the
provided software, software
equipped with the PC or commercially
available software. If you are using a
Windows
®
XP, you can use Windows
®
Messenger to conduct video conferences over
the Internet, using a camcorder. For details,
refer to the help for the Windows
®
Messenger.
Notes:
•
Refer to “SOFTWARE
INSTALLATION AND USB CONNECTION
GUIDE” for the bundled software and drivers.
• It is recommended to use the AC Adapter
as the power supply instead of the battery
pack (
16).
•
Never connect the USB cable
and the DV cable simultaneously to the
camcorder. Connect only the cable you
wish to use to the camcorder.
• When using a DV cable, be sure to use the
optional JVC VC-VDV206U or VC-VDV204U
DV cable depending on the type of DV
connector (4 or 6 pins) on the PC.
•
If the PC connected to the
camcorder via the USB cable is not powered,
the camcorder does not enter the USB mode.
• The date/time information cannot be captured
into the PC.
• Refer to the instruction manuals of the PC and
Software.
•
The still images can also be
transferred to a PC with a DV connector-
equipped capture board.
• The system may not work properly depending
on the PC or capture board you are using.
• If, after connecting a DV cable to the camcorder
and it doesn’t work, restart the camcorder.
•
Do not remove memory card during
USB connection between PC and set.
“USB” and/or “
” appears on the
LCD monitor while the PC is accessing
data in the camcorder or the camcorder is
transferring a fi le to the PC.
NEVER disconnect the USB cable
while “
” is displayed on the LCD
monitor since this can result in product
damage.
USB connector
Core fi lter
Core fi lter
DV cable
(optional)
or
PC with DV connector
To DV
Connector
To USB
connector
USB Cable
(provided)
DV connector
[A]
[B]
GR-D850&870AG_EN.indb 43
GR-D850&870AG_EN.indb 43
11/23/2007 4:57:14 PM
11/23/2007 4:57:14 PM