JVC GR-D770AS Скачать руководство пользователя страница 43

Страница: 43 / 52

EDITING

MasterPage: Start_Right

ADV

ANCED FEA

TURES

It is also possible to copy recorded scenes
from the camcorder onto another video unit
equipped with a DV connector. Since a digital
signal is sent, there is little, if any, image or
sound deterioration.

To use this camcorder as a player

Make sure all units are turned off.

Connect this camcorder to a video unit

equipped with a DV input connector using a DV
cable as shown in the illustration.

Start playback on the camcorder.

(

pg. 21)

At the point you want to start dubbing, start

recording on the video unit. (Refer to the video
unit’s instruction manual.)

To stop dubbing, stop recording on the

video unit, then stop playback on this
camcorder.

NOTES:

●

It is recommended to use the AC Adapter as
the power supply instead of the battery
pack. (

pg. 13)

●

If a blank portion or disturbed image is played
back on the player during dubbing, the dubbing
may stop so that an unusual image is not
dubbed.

●

Even though the DV cable is connected
correctly, sometimes the image may not appear
in step

. If this occurs, turn off the power and

make connections again.

●

If “Playback Zoom” (

pg. 25) or “Playback

Special Effects” (

pg. 25) is attempted or

SNAPSHOT

is pressed during playback, only

the original playback image recorded on the
tape is output from the DV IN/OUT connector.

●

When using a DV cable, be sure to use the
optional JVC VC-VDV204U or VC-VDV206U
DV cable.

To use this camcorder as a recorder

Make sure all units are turned off.

Connect this camcorder to a video unit

equipped with a DV output connector using a
DV cable as shown in the illustration.

Set the camcorder’s Power Switch to

“PLAY”.

Set “REC MODE” to “SP” or “LP”. (

pg. 35)

Start playback on the player.

Press the Recording Start/Stop Button to

engage the Record-Pause mode.

•

The “

” indication appears on the

screen.

At the point you want to start dubbing,

press the Recording Start/Stop Button to start
dubbing. The

indication rotates.

Press the Recording Start/Stop Button

again to stop dubbing. The

indication

stops rotating.

Press

to return to the normal playback

mode.

NOTE:

Digital Dubbing is performed in the sound mode
recorded on the original tape, regardless of the
current “SOUND MODE” setting. (

pg. 33)

Appears if dubbing of copyguarded signals is
attempted while this camcorder is being
used as a recorder.

Dubbing To Or From A Video Unit
Equipped With A DV Connector
(Digital Dubbing)

Core filter

To DV IN/OUT

DV cable (optional)

To DV IN/OUT

Video unit equipped with DV connector

COPY PROTECTED

DV IN

GR-D770AS_EN.book Page 43 Wednesday, January 17, 2007 10:08 AM

Содержание GR-D770AS





















































Результаты поиска

Содержание GR-D770AS

Отзывы:

Похожие инструкции для GR-D770AS

Бренды по названию

Популярные бренды

JVC GR-D770AS, Инструкция по эксплуатации

Результаты поиска

Содержание GR-D770AS

Отзывы:

Похожие инструкции для GR-D770AS

Бренды по названию

Популярные бренды