EN
37
FEATURES FOR RECORDING
MasterPage: Start_Right
ADV
ANCED FEA
TURES
The camcorder’s Full Range AF system offers
continuous shooting ability from close-up (as
close as approx. 5 cm to the subject) to infinity.
However, correct focus may not be obtained
depending on the shooting condition. In this
case, use the manual focus mode.
1
Set the Power Switch to “REC”.
2
Set the recording mode to “
M
”.
3
Press
FOCUS
. The manual focus indicator
appears.
4
Press
1
or
2
to focus on a subject.
●
When the focus level cannot be adjusted any
further or closer, “
” or “
” will blink.
5
Press
SET
. Focus adjustment is complete.
To reset to Auto Focus
Press
FOCUS
twice.
Manual focus is recommended in
situations listed below.
●
When two subjects overlap in the same scene.
●
When illumination is low.*
●
When the subject has no contrast (difference in
brightness and darkness), such as a flat, one-
colour wall, or a clear, blue sky.*
●
When a dark object is barely visible in the LCD
monitor or the viewfinder.*
●
When the scene contains minute patterns or
identical patterns that are regularly repeated.
●
When the scene is affected by sunbeams or
light reflecting off the surface of a body of water.
●
When shooting a scene with a high-contrast
background.
* The following low-contrast warnings appear
blinking: , ,
and .
Manual exposure control is recommended in
the following situations:
●
When shooting using reverse lighting or when
the background is too bright.
●
When shooting on a reflective natural
background such as at the beach or when
skiing.
●
When the background is overly dark or the
subject is bright.
1
Open the LCD monitor fully.
2
Set the Power Switch to “REC”.
3
Set the recording mode to “
M
”.
4
Press
MENU
.
5
Select “FUNCTION”, press
SET
or
2
.
6
Select “EXPOSURE”, press
SET
or
2
.
7
Select the appropriate exposure, press
SET
or
2
.
●
To brighten the image, press
3
. To darken the
image, press
4
. (m/-6)
8
Press
MENU
.
NOTES:
●
If the adjustment does not cause any visible
change in brightness, set “GAIN UP” to “AUTO”.
(
●
You cannot use the manual exposure control at
the same time when “PROGRAM AE” is set to
“SPOTLIGHT” or “SNOW” (
the backlight compensation.
Manual Focus
Manual focus indicator
2
2
2
2
1
1
1
1
SET
FOCUS
Exposure Control
EXPOSURE
0
1
Select
2
SET
GR-D770AS_EN.book Page 37 Wednesday, January 17, 2007 10:08 AM