EN
17
GETTING STARTED
MasterPage: Start_Right
1
Adjust the velcro strip.
2
Pass your right hand
through the loop and
grasp the grip.
3
Adjust your thumb
and fingers through the
grip to easily operate the
Recording Start/Stop
Button, Power Switch
and Power Zoom Lever.
Be sure to fasten the
velcro strip to your preference.
1
Set the Power Switch to “REC” while pressing
down the Lock Button located on the switch.
2
Make sure the LCD monitor is closed and
locked. Pull out the viewfinder fully and adjust it
manually for best viewability.
3
Turn the Dioptre Adjustment Control until the
indications in the viewfinder are clearly focused.
CAUTION:
When retracting the viewfinder, take care not to
pinch your fingers.
1
Set the Power Switch
to “REC” or “PLAY” while
pressing down the Lock
Button located on the
switch.
If you are in Recording
mode, set the recording
mode to “
M
”. (
2
Open the LCD monitor
fully. (
●
To adjust the brightness of
the viewfinder, pull out the
viewfinder fully and set
“PRIORITY” to “FINDER”
(
.
3
Press
MENU
. The Menu Screen appears.
If you are in Playback mode, please proceed to
step
5
.
4
Press , ,
or
to
select
“DISPLAY”,
and press
SET
. The DISPLAY Menu appears.
5
Press , ,
or
to
select
“BRIGHT”,
and press
SET
. The Menu Screen closes and
the brightness control MENU appears.
6
Press
or
until the appropriate
brightness is reached and press
SET
or
.
7
Press
MENU
. The Menu screen closes.
To attach the camcorder
to a tripod, align the
direction stud and screw
to the mounting socket
and stud hole on the
camcorder. Then tighten
the screw clockwise.
●
Some tripods are not
equipped with studs.
Grip Adjustment
Viewfinder Adjustment
Dioptre Adjustment Control
Example:
Brightness Adjustment Of The
Display
Tripod Mounting
BRIGHT
MENU
GR-D650E-640E.book Page 17 Tuesday, May 30, 2006 11:31 AM
