background image

EN

 3

MasterPage: Safety_Right

SOME DO’S AND DON’TS ON THE SAFE USE OF 
EQUIPMENT

This equipment has been designed and 
manufactured to meet international safety standards 
but, like any electrical equipment, care must be taken 
if you are to obtain the best results and safety is to 
be assured.

DO

 read the operating instructions before you attempt to use 

the equipment.

DO

 ensure that all electrical connections (including the mains 

plug, extension leads and interconnections between pieces 
of equipment) are properly made and in accordance with the 
manufacturer’s instructions. Switch off and withdraw the 
mains plug when making or changing connections.

DO

 consult your dealer if you are ever in doubt about the 

installation, operation or safety of your equipment.

DO 

be careful with glass panels or doors on equipment.

DON’T 

continue to operate the equipment if you are in any 

doubt about it working normally, or if it is damaged in any way 
— switch off, withdraw the mains plug and consult your 
dealer.

DON’T 

remove any fixed cover as this may expose 

dangerous voltages.

DON’T 

leave equipment switched on when it is unattended 

unless it is specifically stated that it is designed for 
unattended operation or has a standby mode. Switch off 
using the switch on the equipment and make sure that your 
family knows how to do this. Special arrangements may need 
to be made for infirm or handicapped people.

DON’T 

use equipment such as personal stereos or radios so 

that you are distracted from the requirements of road safety. It 
is illegal to watch television whilst driving.

DON’T 

listen to headphones at high volume, as such use can 

permanently damage your hearing.

DON’T 

obstruct the ventilation of the equipment, for example 

with curtains or soft furnishings. Overheating will cause 
damage and shorten the life of the equipment.

DON’T 

use makeshift stands and NEVER fix legs with wood 

screws — to ensure complete safety always fit the 
manufacturer’s approved stand or legs with the fixings 
provided according to the instructions.

DON’T 

allow electrical equipment to be exposed to rain or 

moisture.

ABOVE ALL

NEVER let anyone especially children push anything into 
holes, slots or any other opening in the case — this could 
result in a fatal electrical shock;

NEVER guess or take chances with electrical equipment of 
any kind — it is better to be safe than sorry! 

This camcorder is designed exclusively for the digital video 
cassette. Only cassettes marked “

” can be used with 

this unit.

Before recording an important scene…

…make sure you only use cassettes with the Mini DV mark 

.

…remember that this camcorder is not compatible with other 
digital video formats.
…remember that this camcorder is intended for private 
consumer use only. Any commercial use without proper 
permission is prohibited. (Even if you record an event such as 
a show, performance or exhibition for personal enjoyment, it 
is strongly recommended that you obtain permission 
beforehand.)

GR-D225EX.book  Page 3  Friday, November 26, 2004  5:18 PM

Содержание GR-D225









































Отзывы: